lkml.org 
[lkml]   [2023]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 0/4] soc: qcom: Introduce PMIC GLINK
From
On 13/01/2023 04:11, Bjorn Andersson wrote:
> This implements the base PMIC GLINK driver, a power_supply driver and a
> driver for the USB Type-C altmode protocol. This has been tested and
> shown to provide battery information, USB Type-C switch and mux requests
> and DisplayPort notifications on SC8180X, SC8280XP and SM8350.
>
> Bjorn Andersson (4):
> dt-bindings: soc: qcom: Introduce PMIC GLINK binding
> soc: qcom: pmic_glink: Introduce base PMIC GLINK driver
> soc: qcom: pmic_glink: Introduce altmode support
> power: supply: Introduce Qualcomm PMIC GLINK power supply
>
> .../bindings/soc/qcom/qcom,pmic-glink.yaml | 102 ++
> drivers/power/supply/Kconfig | 9 +
> drivers/power/supply/Makefile | 1 +
> drivers/power/supply/qcom_battmgr.c | 1421 +++++++++++++++++
> drivers/soc/qcom/Kconfig | 15 +
> drivers/soc/qcom/Makefile | 2 +
> drivers/soc/qcom/pmic_glink.c | 336 ++++
> drivers/soc/qcom/pmic_glink_altmode.c | 477 ++++++
> include/linux/soc/qcom/pmic_glink.h | 32 +
> 9 files changed, 2395 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
> create mode 100644 drivers/power/supply/qcom_battmgr.c
> create mode 100644 drivers/soc/qcom/pmic_glink.c
> create mode 100644 drivers/soc/qcom/pmic_glink_altmode.c
> create mode 100644 include/linux/soc/qcom/pmic_glink.h
>

How does the USB PHY and a USB redriver fit into this ?

Is the host supposed to manage both/neither ? Is the DSP responsible for
configuring the PHY lanes and the turnaround on orientation switch ?

---
bod

\
 
 \ /
  Last update: 2023-03-26 23:39    [W:0.110 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site