lkml.org 
[lkml]   [2023]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/2] ARM: Add GXP Fan and SPI controllers
Date
From: Nick Hawkins <nick.hawkins@hpe.com>

The GXP SoC can support up to 16 fans through the interface provided by
the CPLD. The fans speeds are controlled via a pwm value 0-255. The fans
are also capable of reporting if they have failed to the CPLD which in
turn reports the status to the GXP SoC. Based on previous feedback the
registers required for fan control have been regmaped individualy to fan
driver. Specifically these registers are the function 2 registers and the
programmable logic registers from the CPLD. Additionally in this patchset
there is support for the SPI driver which already exists as spi-gxp.c in
the SPI driver.

---

Changes since v4:
*Removed patch for yaml and driver as they have been applied to
hwmon-next
*Fixed issues with range issue with dtsi file and removed
comments

Changes since v3:
*Removed patch for ABI documentation of sysfs-class-hwmon as it
was applied
*Removed unecessary HWMON_PWM_ENABLE usage

Changes since v2:
*Removed use of regmap in favor of __iomem
*Updated description on yaml documentation
*Simplified commit description on sysfs-class-hwmon
*Removed use of dev and hwmon_dev from drvdata structure
*Fixed missing breaks in switch statements
*Added check for pwm values less than 0
*Removed regmap and slab header file includes

Changes since v1:

*Renamed fn2reg to fn2 in dtsi file and documentation
*Renamed plreg to pl in dtsi file and documentation
*Renamed fanctrl to fan-controller in dtsi file and documentation
*Adjusted base register range for fan ctrl in dtsi
*Changed commit description on fan-ctrl device-tree binding
*Changed register description on fan-ctrl device-tree binding
*Changed number of supported fans from 16 to 8 in driver code and
documentation
*Modified commit description of fan code
*Removed support for fan[0-15]_input
*Removed PWM defines in driver code
*Added gxp-fan-ctrl to hwmon's index.rst
*Removed mutex in driver code
*Added fan_enable support in fan code and documentation
*Fixed comment in driver code presents -> present
*Removed unecessary include files in fan code
*Added comments to describe what power state is and
calculations for accessing plreg in fan code
*Removed use of variable offsets in fan code
*Fixed GPL header in fan code
*Changed module description for fan controller
*Added kfree in case of failure to initialize driver
*Added missing yaml file to MAINTAINERS

Nick Hawkins (2):
ARM: dts: add GXP Support for fans and SPI
ARM: multi_v7_defconfig: Add GXP Fan and SPI support

arch/arm/boot/dts/hpe-bmc-dl360gen10.dts | 58 +++++++++++++++++++++
arch/arm/boot/dts/hpe-gxp.dtsi | 64 +++++++++++++++++-------
arch/arm/configs/multi_v7_defconfig | 2 +
3 files changed, 105 insertions(+), 19 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2023-03-26 23:39    [W:0.107 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site