lkml.org 
[lkml]   [2023]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 00/23] ufs: qcom: Add HS-G4 support
On 22-12-22, 19:39, Manivannan Sadhasivam wrote:
> Hello,
>
> This series adds HS-G4 support to the Qcom UFS driver and PHY driver.
> The newer Qcom platforms support configuring the UFS controller and PHY
> in dual gears (i.e., controller/PHY can be configured to run in two gear
> speeds). This is accomplished by adding two different PHY init sequences
> to the PHY driver and the UFS driver requesting the one that's required
> based on the platform configuration.
>
> Initially the ufs-qcom driver will use the default gear G2 for enumerating
> the UFS device. Afer enumeration, the max gear supported by both the
> controller and device would be found out and that will be used thereafter.
> But for using the max gear after enumeration, the ufs-qcom driver requires
> the UFS device to be reinitialized. For this purpose, a separate quirk has
> been introduced in the UFS core along with a callback and those will be used
> by the ufs-qcom driver.

The series lgtm. This fails for me to apply though due to other patches
I have picked up.

Can you please rebase the phy patches and send those

--
~Vinod

\
 
 \ /
  Last update: 2023-03-26 23:38    [W:1.200 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site