lkml.org 
[lkml]   [2022]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 02/16] phy: qcom-qmp-combo: drop unused defines
From
On 07/09/2022 14:07, Johan Hovold wrote:
> Drop defines and enums that are unused since the QMP driver split.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 15 ---------------
> 1 file changed, 15 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index 9ce2ab56be4c..838f7e328b55 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -28,16 +28,11 @@
> #define SW_RESET BIT(0)
> /* QPHY_POWER_DOWN_CONTROL */
> #define SW_PWRDN BIT(0)
> -#define REFCLK_DRV_DSBL BIT(1)
> /* QPHY_START_CONTROL bits */
> #define SERDES_START BIT(0)
> #define PCS_START BIT(1)
> -#define PLL_READY_GATE_EN BIT(3)
> /* QPHY_PCS_STATUS bit */
> #define PHYSTATUS BIT(6)
> -#define PHYSTATUS_4_20 BIT(7)
> -/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
> -#define PCS_READY BIT(0)

I think these defines, describing registers and bits, can go to the
common header instead.

For the rest of the patch:

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

>
> /* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
> /* DP PHY soft reset */
> @@ -71,8 +66,6 @@
> #define POWER_DOWN_DELAY_US_MIN 10
> #define POWER_DOWN_DELAY_US_MAX 11
>
> -#define MAX_PROP_NAME 32
> -
> /* Define the assumed distance between lanes for underspecified device trees. */
> #define QMP_PHY_LEGACY_LANE_STRIDE 0x400
>
> @@ -115,22 +108,14 @@ struct qmp_phy_init_tbl {
>
> /* set of registers with offsets different per-PHY */
> enum qphy_reg_layout {
> - /* Common block control registers */
> - QPHY_COM_SW_RESET,
> - QPHY_COM_POWER_DOWN_CONTROL,
> - QPHY_COM_START_CONTROL,
> - QPHY_COM_PCS_READY_STATUS,
> /* PCS registers */
> QPHY_SW_RESET,
> QPHY_START_CTRL,
> - QPHY_PCS_READY_STATUS,
> QPHY_PCS_STATUS,
> QPHY_PCS_AUTONOMOUS_MODE_CTRL,
> QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
> QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
> QPHY_PCS_POWER_DOWN_CONTROL,
> - /* PCS_MISC registers */
> - QPHY_PCS_MISC_TYPEC_CTRL,
> /* Keep last to ensure regs_layout arrays are properly initialized */
> QPHY_LAYOUT_SIZE
> };

--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2022-09-09 11:23    [W:0.162 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site