Messages in this thread | | | From | Hari Prasath <> | Subject | [linux][PATCH 0/6] Add support for sam9x60 curiosity board | Date | Wed, 7 Sep 2022 14:50:48 +0530 |
| |
This patch series addresses the following: - Moving of flexcom definitions from board file to SoC file plus some minor changes to its properties. - Add support for the new sam9x60 curiosity board based on the existing sam9x60 SoC.
Durai Manickam KR (1): ARM: dts: at91: sam9x60: Add missing flexcom definitions
Hari Prasath (2): ARM: dts: at91: sam9x60: Move flexcom definitions to the SoC dtsi ARM: dts: at91: sam9x60: Add DMA bindigs for the flexcom nodes
Manikandan M (3): ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60_curiosity board
.../devicetree/bindings/arm/atmel-at91.yaml | 6 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-sam9x60_curiosity.dts | 532 +++++++++++++++ arch/arm/boot/dts/at91-sam9x60ek.dts | 49 +- arch/arm/boot/dts/sam9x60.dtsi | 623 ++++++++++++++++++ 5 files changed, 1172 insertions(+), 39 deletions(-) create mode 100644 arch/arm/boot/dts/at91-sam9x60_curiosity.dts
-- 2.17.1
| |