lkml.org 
[lkml]   [2022]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v7 0/5] vfio/pci: power management changes
From
On 9/3/2022 12:12 AM, Alex Williamson wrote:
> On Mon, 29 Aug 2022 17:18:45 +0530
> Abhishek Sahu <abhsahu@nvidia.com> wrote:
>
>> This is part 2 for the vfio-pci driver power management support.
>> Part 1 of this patch series was related to adding D3cold support
>> when there is no user of the VFIO device and has already merged in the
>> mainline kernel. If we enable the runtime power management for
>> vfio-pci device in the guest OS, then the device is being runtime
>> suspended (for linux guest OS) and the PCI device will be put into
>> D3hot state (in function vfio_pm_config_write()). If the D3cold
>> state can be used instead of D3hot, then it will help in saving
>> maximum power. The D3cold state can't be possible with native
>> PCI PM. It requires interaction with platform firmware which is
>> system-specific. To go into low power states (Including D3cold),
>> the runtime PM framework can be used which internally interacts
>> with PCI and platform firmware and puts the device into the
>> lowest possible D-States.
>>
>> This patch series adds the support to engage runtime power management
>> initiated by the user. Since D3cold state can't be achieved by writing
>> PCI standard PM config registers, so new device features have been
>> added in DEVICE_FEATURE IOCTL for low power entry and exit related
>> handling. For the PCI device, this low power state will be D3cold
>> (if the platform supports the D3cold state). The hypervisors can implement
>> virtual ACPI methods to make the integration with guest OS.
>> For example, in guest Linux OS if PCI device ACPI node has
>> _PR3 and _PR0 power resources with _ON/_OFF method, then guest
>> Linux OS makes the _OFF call during D3cold transition and
>> then _ON during D0 transition. The hypervisor can tap these virtual
>> ACPI calls and then do the low power related IOCTL.
>>
>> The entry device feature has two variants. These two variants are mainly
>> to support the different behaviour for the low power entry.
>> If there is any access for the VFIO device on the host side, then the
>> device will be moved out of the low power state without the user's
>> guest driver involvement. Some devices (for example NVIDIA VGA or
>> 3D controller) require the user's guest driver involvement for
>> each low-power entry. In the first variant, the host can move the
>> device into low power without any guest driver involvement while
>> in the second variant, the host will send a notification to user
>> through eventfd and then user guest driver needs to move the device
>> into low power. The hypervisor can implement the virtual PME
>> support to notify the guest OS. Please refer
>> https://lore.kernel.org/lkml/20220701110814.7310-7-abhsahu@nvidia.com/
>> where initially this virtual PME was implemented in the vfio-pci driver
>> itself, but later-on, it has been decided that hypervisor can implement
>> this.
>>
>> * Changes in v7
>
> Applied to vfio next branch for v6.1. Thanks,
>
> Alex
>

Thanks Alex for your guidance and support.

Regards,
Abhishek

\
 
 \ /
  Last update: 2022-09-05 06:56    [W:0.104 / U:1.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site