lkml.org 
[lkml]   [2022]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 0/5] vfio/pci: power management changes
On Mon, 29 Aug 2022 17:18:45 +0530
Abhishek Sahu <abhsahu@nvidia.com> wrote:

> This is part 2 for the vfio-pci driver power management support.
> Part 1 of this patch series was related to adding D3cold support
> when there is no user of the VFIO device and has already merged in the
> mainline kernel. If we enable the runtime power management for
> vfio-pci device in the guest OS, then the device is being runtime
> suspended (for linux guest OS) and the PCI device will be put into
> D3hot state (in function vfio_pm_config_write()). If the D3cold
> state can be used instead of D3hot, then it will help in saving
> maximum power. The D3cold state can't be possible with native
> PCI PM. It requires interaction with platform firmware which is
> system-specific. To go into low power states (Including D3cold),
> the runtime PM framework can be used which internally interacts
> with PCI and platform firmware and puts the device into the
> lowest possible D-States.
>
> This patch series adds the support to engage runtime power management
> initiated by the user. Since D3cold state can't be achieved by writing
> PCI standard PM config registers, so new device features have been
> added in DEVICE_FEATURE IOCTL for low power entry and exit related
> handling. For the PCI device, this low power state will be D3cold
> (if the platform supports the D3cold state). The hypervisors can implement
> virtual ACPI methods to make the integration with guest OS.
> For example, in guest Linux OS if PCI device ACPI node has
> _PR3 and _PR0 power resources with _ON/_OFF method, then guest
> Linux OS makes the _OFF call during D3cold transition and
> then _ON during D0 transition. The hypervisor can tap these virtual
> ACPI calls and then do the low power related IOCTL.
>
> The entry device feature has two variants. These two variants are mainly
> to support the different behaviour for the low power entry.
> If there is any access for the VFIO device on the host side, then the
> device will be moved out of the low power state without the user's
> guest driver involvement. Some devices (for example NVIDIA VGA or
> 3D controller) require the user's guest driver involvement for
> each low-power entry. In the first variant, the host can move the
> device into low power without any guest driver involvement while
> in the second variant, the host will send a notification to user
> through eventfd and then user guest driver needs to move the device
> into low power. The hypervisor can implement the virtual PME
> support to notify the guest OS. Please refer
> https://lore.kernel.org/lkml/20220701110814.7310-7-abhsahu@nvidia.com/
> where initially this virtual PME was implemented in the vfio-pci driver
> itself, but later-on, it has been decided that hypervisor can implement
> this.
>
> * Changes in v7

Applied to vfio next branch for v6.1. Thanks,

Alex

\
 
 \ /
  Last update: 2022-09-02 20:45    [W:1.347 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site