lkml.org 
[lkml]   [2022]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] ARM: dts: vf610-zii-dev-rev-c: fix polarity of at86rf233 reset line
at86rf230 driver starts with having reset line high, and then drives it
low and then high again, and even calls it "rstn" internally, therefore
it needs to be annotated as "active low" in the DTS.

This will make difference when at86rf230 driver will be converted to
gpiod API that respects declared line polarity.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index de79dcfd32e6..f892977da9e4 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -259,7 +259,7 @@ atzb-rf-233@1 {
xtal-trim = /bits/ 8 <0x06>;

sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
- reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+ reset-gpio = <&gpio6 10 GPIO_ACTIVE_LOW>;

fsl,spi-cs-sck-delay = <180>;
fsl,spi-sck-cs-delay = <250>;
--
2.38.0.rc1.362.ged0d419d3c-goog

--
Dmitry

\
 
 \ /
  Last update: 2022-09-30 20:25    [W:0.032 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site