lkml.org 
[lkml]   [2022]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2] ARM: dts: stihxxx-b2120: fix polarity of reset line of tsin0 port
According to c8sectpfe driver code we first drive reset line low and
then high to reset the port, therefore the reset line is supposed to
be annotated as "active low". This will be important when we convert
the driver to gpiod API.

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---

v2: fixed typo in the subject, added Patrice's reviewed-by

arch/arm/boot/dts/stihxxx-b2120.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 2aa94605d3d4..d52a7aaa1074 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -178,7 +178,7 @@ tsin0: port {
tsin-num = <0>;
serial-not-parallel;
i2c-bus = <&ssc2>;
- reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio15 4 GPIO_ACTIVE_LOW>;
dvb-card = <STV0367_TDA18212_NIMA_1>;
};
};
--
2.38.0.rc1.362.ged0d419d3c-goog

--
Dmitry

\
 
 \ /
  Last update: 2022-09-30 18:02    [W:0.080 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site