Messages in this thread Patch in this message | | | From | Fabrice Gasnier <> | Subject | [PATCH] ARM: dts: stm32: update vbus-supply of usbphyc_port0 on stm32mp157c-ev1 | Date | Fri, 30 Sep 2022 17:02:32 +0200 |
| |
From: Amelie Delaunay <amelie.delaunay@foss.st.com>
phy-stm32-usbphyc bindings uses a connector node with vbus-supply property.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> --- arch/arm/boot/dts/stm32mp157c-ev1.dts | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index d142dd30e16b..e22e394832a8 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -385,6 +385,11 @@ &usbphyc_port0 { st,tune-squelch-level = <3>; st,tune-hs-rx-offset = <2>; st,no-lsfs-sc; + + connector { + compatible = "usb-a-connector"; + vbus-supply = <&vbus_sw>; + }; }; &usbphyc_port1 { -- 2.25.1
| |