lkml.org 
[lkml]   [2022]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next] net: ipa: update comments
Date
This patch just updates comments throughout the IPA code.

Transaction state is now tracked using indexes into an array rather
than linked lists, and a few comments refer to the "old way" of
doing things. The description of how transactions are used was
changed to refer to "operations" rather than "commands", to
(hopefully) remove a possible ambiguity.

IPA register offsets and fields are now handled differently as well,
and the register documentation is updated to better describe the
code.

A few minor updates to comments were made (e.g., adding a missing
word, fixing a typo or punctuation, etc.).

Finally, the local macro atomic_dec_not_zero() is no longer used, so
it is deleted.

Signed-off-by: Alex Elder <elder@linaro.org>
---
drivers/net/ipa/gsi.c | 24 +++++------
drivers/net/ipa/gsi_private.h | 8 ++--
drivers/net/ipa/gsi_trans.c | 56 ++++++++++++------------
drivers/net/ipa/gsi_trans.h | 2 +-
drivers/net/ipa/ipa_cmd.c | 2 +-
drivers/net/ipa/ipa_data.h | 2 +-
drivers/net/ipa/ipa_endpoint.c | 2 -
drivers/net/ipa/ipa_reg.h | 79 ++++++++++++++--------------------
8 files changed, 78 insertions(+), 97 deletions(-)

diff --git a/drivers/net/ipa/gsi.c b/drivers/net/ipa/gsi.c
index f8036ee78647f..6faa358c53fed 100644
--- a/drivers/net/ipa/gsi.c
+++ b/drivers/net/ipa/gsi.c
@@ -56,9 +56,9 @@
* element can also contain an immediate command, requesting the IPA perform
* actions other than data transfer.
*
- * Each TRE refers to a block of data--also located DRAM. After writing one
- * or more TREs to a channel, the writer (either the IPA or an EE) writes a
- * doorbell register to inform the receiving side how many elements have
+ * Each TRE refers to a block of data--also located in DRAM. After writing
+ * one or more TREs to a channel, the writer (either the IPA or an EE) writes
+ * a doorbell register to inform the receiving side how many elements have
* been written.
*
* Each channel has a GSI "event ring" associated with it. An event ring
@@ -1347,8 +1347,8 @@ gsi_event_trans(struct gsi *gsi, struct gsi_event *event)
* we update transactions to record their actual received lengths.
*
* When an event for a TX channel arrives we use information in the
- * transaction to report the number of requests and bytes have been
- * transferred.
+ * transaction to report the number of requests and bytes that have
+ * been transferred.
*
* This function is called whenever we learn that the GSI hardware has filled
* new events since the last time we checked. The ring's index field tells
@@ -1474,7 +1474,7 @@ void gsi_channel_doorbell(struct gsi_channel *channel)
iowrite32(val, gsi->virt + GSI_CH_C_DOORBELL_0_OFFSET(channel_id));
}

-/* Consult hardware, move any newly completed transactions to completed list */
+/* Consult hardware, move newly completed transactions to completed state */
void gsi_channel_update(struct gsi_channel *channel)
{
u32 evt_ring_id = channel->evt_ring_id;
@@ -1515,17 +1515,17 @@ void gsi_channel_update(struct gsi_channel *channel)
*
* Return: Transaction pointer, or null if none are available
*
- * This function returns the first entry on a channel's completed transaction
- * list. If that list is empty, the hardware is consulted to determine
- * whether any new transactions have completed. If so, they're moved to the
- * completed list and the new first entry is returned. If there are no more
- * completed transactions, a null pointer is returned.
+ * This function returns the first of a channel's completed transactions.
+ * If no transactions are in completed state, the hardware is consulted to
+ * determine whether any new transactions have completed. If so, they're
+ * moved to completed state and the first such transaction is returned.
+ * If there are no more completed transactions, a null pointer is returned.
*/
static struct gsi_trans *gsi_channel_poll_one(struct gsi_channel *channel)
{
struct gsi_trans *trans;

- /* Get the first transaction from the completed list */
+ /* Get the first completed transaction */
trans = gsi_channel_trans_complete(channel);
if (trans)
gsi_trans_move_polled(trans);
diff --git a/drivers/net/ipa/gsi_private.h b/drivers/net/ipa/gsi_private.h
index af4cc13864e21..6a73dae764d49 100644
--- a/drivers/net/ipa/gsi_private.h
+++ b/drivers/net/ipa/gsi_private.h
@@ -18,13 +18,13 @@ struct gsi_channel;

/**
* gsi_trans_move_complete() - Mark a GSI transaction completed
- * @trans: Transaction to commit
+ * @trans: Transaction whose state is to be updated
*/
void gsi_trans_move_complete(struct gsi_trans *trans);

/**
* gsi_trans_move_polled() - Mark a transaction polled
- * @trans: Transaction to update
+ * @trans: Transaction whose state is to be updated
*/
void gsi_trans_move_polled(struct gsi_trans *trans);

@@ -97,8 +97,8 @@ void gsi_channel_doorbell(struct gsi_channel *channel);
/* gsi_channel_update() - Update knowledge of channel hardware state
* @channel: Channel to be updated
*
- * Consult hardware, move any newly completed transactions to a
- * channel's completed list.
+ * Consult hardware, change the state of any newly-completed transactions
+ * on a channel.
*/
void gsi_channel_update(struct gsi_channel *channel);

diff --git a/drivers/net/ipa/gsi_trans.c b/drivers/net/ipa/gsi_trans.c
index 03e54fc4376a6..c791e32161b93 100644
--- a/drivers/net/ipa/gsi_trans.c
+++ b/drivers/net/ipa/gsi_trans.c
@@ -22,37 +22,36 @@
* DOC: GSI Transactions
*
* A GSI transaction abstracts the behavior of a GSI channel by representing
- * everything about a related group of IPA commands in a single structure.
- * (A "command" in this sense is either a data transfer or an IPA immediate
+ * everything about a related group of IPA operations in a single structure.
+ * (A "operation" in this sense is either a data transfer or an IPA immediate
* command.) Most details of interaction with the GSI hardware are managed
- * by the GSI transaction core, allowing users to simply describe commands
+ * by the GSI transaction core, allowing users to simply describe operations
* to be performed. When a transaction has completed a callback function
* (dependent on the type of endpoint associated with the channel) allows
* cleanup of resources associated with the transaction.
*
- * To perform a command (or set of them), a user of the GSI transaction
+ * To perform an operation (or set of them), a user of the GSI transaction
* interface allocates a transaction, indicating the number of TREs required
- * (one per command). If sufficient TREs are available, they are reserved
+ * (one per operation). If sufficient TREs are available, they are reserved
* for use in the transaction and the allocation succeeds. This way
- * exhaustion of the available TREs in a channel ring is detected
- * as early as possible. All resources required to complete a transaction
- * are allocated at transaction allocation time.
+ * exhaustion of the available TREs in a channel ring is detected as early
+ * as possible. Any other resources that might be needed to complete a
+ * transaction are also allocated when the transaction is allocated.
*
- * Commands performed as part of a transaction are represented in an array
- * of Linux scatterlist structures. This array is allocated with the
- * transaction, and its entries are initialized using standard scatterlist
- * functions (such as sg_set_buf() or skb_to_sgvec()).
+ * Operations performed as part of a transaction are represented in an array
+ * of Linux scatterlist structures, allocated with the transaction. These
+ * scatterlist structures are initialized by "adding" operations to the
+ * transaction. If a buffer in an operation must be mapped for DMA, this is
+ * done at the time it is added to the transaction. It is possible for a
+ * mapping error to occur when an operation is added. In this case the
+ * transaction should simply be freed; this correctly releases resources
+ * associated with the transaction.
*
- * Once a transaction's scatterlist structures have been initialized, the
- * transaction is committed. The caller is responsible for mapping buffers
- * for DMA if necessary, and this should be done *before* allocating
- * the transaction. Between a successful allocation and commit of a
- * transaction no errors should occur.
- *
- * Committing transfers ownership of the entire transaction to the GSI
- * transaction core. The GSI transaction code formats the content of
- * the scatterlist array into the channel ring buffer and informs the
- * hardware that new TREs are available to process.
+ * Once all operations have been successfully added to a transaction, the
+ * transaction is committed. Committing transfers ownership of the entire
+ * transaction to the GSI transaction core. The GSI transaction code
+ * formats the content of the scatterlist array into the channel ring
+ * buffer and informs the hardware that new TREs are available to process.
*
* The last TRE in each transaction is marked to interrupt the AP when the
* GSI hardware has completed it. Because transfers described by TREs are
@@ -125,11 +124,10 @@ void gsi_trans_pool_exit(struct gsi_trans_pool *pool)
memset(pool, 0, sizeof(*pool));
}

-/* Allocate the requested number of (zeroed) entries from the pool */
-/* Home-grown DMA pool. This way we can preallocate and use the tre_count
- * to guarantee allocations will succeed. Even though we specify max_alloc
- * (and it can be more than one), we only allow allocation of a single
- * element from a DMA pool.
+/* Home-grown DMA pool. This way we can preallocate the pool, and guarantee
+ * allocations will succeed. The immediate commands in a transaction can
+ * require up to max_alloc elements from the pool. But we only allow
+ * allocation of a single element from a DMA pool at a time.
*/
int gsi_trans_pool_init_dma(struct device *dev, struct gsi_trans_pool *pool,
size_t size, u32 count, u32 max_alloc)
@@ -537,8 +535,8 @@ static void gsi_trans_tre_fill(struct gsi_tre *dest_tre, dma_addr_t addr,
*
* Formats channel ring TRE entries based on the content of the scatterlist.
* Maps a transaction pointer to the last ring entry used for the transaction,
- * so it can be recovered when it completes. Moves the transaction to the
- * pending list. Finally, updates the channel ring pointer and optionally
+ * so it can be recovered when it completes. Moves the transaction to
+ * pending state. Finally, updates the channel ring pointer and optionally
* rings the doorbell.
*/
static void __gsi_trans_commit(struct gsi_trans *trans, bool ring_db)
diff --git a/drivers/net/ipa/gsi_trans.h b/drivers/net/ipa/gsi_trans.h
index af8c4c6719d11..18c4ba2636790 100644
--- a/drivers/net/ipa/gsi_trans.h
+++ b/drivers/net/ipa/gsi_trans.h
@@ -74,7 +74,7 @@ struct gsi_trans {

/**
* gsi_trans_pool_init() - Initialize a pool of structures for transactions
- * @pool: GSI transaction poll pointer
+ * @pool: GSI transaction pool pointer
* @size: Size of elements in the pool
* @count: Minimum number of elements in the pool
* @max_alloc: Maximum number of elements allocated at a time from pool
diff --git a/drivers/net/ipa/ipa_cmd.c b/drivers/net/ipa/ipa_cmd.c
index f762d7d5f31fa..87014bbcf9714 100644
--- a/drivers/net/ipa/ipa_cmd.c
+++ b/drivers/net/ipa/ipa_cmd.c
@@ -32,7 +32,7 @@
* immediate command's opcode. The payload for a command resides in AP
* memory and is described by a single scatterlist entry in its transaction.
* Commands do not require a transaction completion callback, and are
- * (currently) always issued using gsi_trans_commit_wait().
+ * always issued using gsi_trans_commit_wait().
*/

/* Some commands can wait until indicated pipeline stages are clear */
diff --git a/drivers/net/ipa/ipa_data.h b/drivers/net/ipa/ipa_data.h
index e15eb3cd3e333..e239bcca833da 100644
--- a/drivers/net/ipa/ipa_data.h
+++ b/drivers/net/ipa/ipa_data.h
@@ -31,7 +31,7 @@
* communication path between the IPA and a particular execution environment
* (EE), such as the AP or Modem. Each EE has a set of channels associated
* with it, and each channel has an ID unique for that EE. For the most part
- * the only GSI channels of concern to this driver belong to the AP
+ * the only GSI channels of concern to this driver belong to the AP.
*
* An endpoint is an IPA construct representing a single channel anywhere
* in the system. An IPA endpoint ID maps directly to an (EE, channel_id)
diff --git a/drivers/net/ipa/ipa_endpoint.c b/drivers/net/ipa/ipa_endpoint.c
index 0da02d8d238d1..a09f323a7e9f6 100644
--- a/drivers/net/ipa/ipa_endpoint.c
+++ b/drivers/net/ipa/ipa_endpoint.c
@@ -23,8 +23,6 @@
#include "ipa_gsi.h"
#include "ipa_power.h"

-#define atomic_dec_not_zero(v) atomic_add_unless((v), -1, 0)
-
/* Hardware is told about receive buffers once a "batch" has been queued */
#define IPA_REPLENISH_BATCH 16 /* Must be non-zero */

diff --git a/drivers/net/ipa/ipa_reg.h b/drivers/net/ipa/ipa_reg.h
index f81381891a2e4..3c768c9d3d100 100644
--- a/drivers/net/ipa/ipa_reg.h
+++ b/drivers/net/ipa/ipa_reg.h
@@ -17,53 +17,38 @@ struct ipa;
* DOC: IPA Registers
*
* IPA registers are located within the "ipa-reg" address space defined by
- * Device Tree. The offset of each register within that space is specified
- * by symbols defined below. The address space is mapped to virtual memory
- * space in ipa_mem_init(). All IPA registers are 32 bits wide.
- *
- * Certain register types are duplicated for a number of instances of
- * something. For example, each IPA endpoint has an set of registers
- * defining its configuration. The offset to an endpoint's set of registers
- * is computed based on an "base" offset, plus an endpoint's ID multiplied
- * and a "stride" value for the register. For such registers, the offset is
- * computed by a function-like macro that takes a parameter used in the
- * computation.
- *
- * Some register offsets depend on execution environment. For these an "ee"
- * parameter is supplied to the offset macro. The "ee" value is a member of
- * the gsi_ee enumerated type.
- *
- * The offset of a register dependent on endpoint ID is computed by a macro
- * that is supplied a parameter "ep", "txep", or "rxep". A register with an
- * "ep" parameter is valid for any endpoint; a register with a "txep" or
- * "rxep" parameter is valid only for TX or RX endpoints, respectively. The
- * "*ep" value is assumed to be less than the maximum valid endpoint ID
- * for the current hardware, and that will not exceed IPA_ENDPOINT_MAX.
- *
- * The offset of registers related to filter and route tables is computed
- * by a macro that is supplied a parameter "er". The "er" represents an
- * endpoint ID for filters, or a route ID for routes. For filters, the
- * endpoint ID must be less than IPA_ENDPOINT_MAX, but is further restricted
- * because not all endpoints support filtering. For routes, the route ID
- * must be less than IPA_ROUTE_MAX.
- *
- * The offset of registers related to resource types is computed by a macro
- * that is supplied a parameter "rt". The "rt" represents a resource type,
- * which is a member of the ipa_resource_type_src enumerated type for
- * source endpoint resources or the ipa_resource_type_dst enumerated type
- * for destination endpoint resources.
- *
- * Some registers encode multiple fields within them. For these, each field
- * has a symbol below defining a field mask that encodes both the position
- * and width of the field within its register.
- *
- * In some cases, different versions of IPA hardware use different offset or
- * field mask values. In such cases an inline_function(ipa) is used rather
- * than a MACRO to define the offset or field mask to use.
- *
- * Finally, some registers hold bitmasks representing endpoints. In such
- * cases the @available field in the @ipa structure defines the "full" set
- * of valid bits for the register.
+ * Device Tree. Each register has a specified offset within that space,
+ * which is mapped into virtual memory space in ipa_mem_init(). Each
+ * has a unique identifer, taken from the ipa_reg_id enumerated type.
+ * All IPA registers are 32 bits wide.
+ *
+ * Certain "parameterized" register types are duplicated for a number of
+ * instances of something. For example, each IPA endpoint has an set of
+ * registers defining its configuration. The offset to an endpoint's set
+ * of registers is computed based on an "base" offset, plus an endpoint's
+ * ID multiplied and a "stride" value for the register. Similarly, some
+ * registers have an offset that depends on execution environment. In
+ * this case, the stride is multiplied by a member of the gsi_ee_id
+ * enumerated type.
+ *
+ * Each version of IPA implements an array of ipa_reg structures indexed
+ * by register ID. Each entry in the array specifies the base offset and
+ * (for parameterized registers) a non-zero stride value. Not all versions
+ * of IPA define all registers. The offset for a register is returned by
+ * ipa_reg_offset() when the register's ipa_reg structure is supplied;
+ * zero is returned for an undefined register (this should never happen).
+ *
+ * Some registers encode multiple fields within them. Each field in
+ * such a register has a unique identifier (from an enumerated type).
+ * The position and width of the fields in a register are defined by
+ * an array of field masks, indexed by field ID. Two functions are
+ * used to access register fields; both take an ipa_reg structure as
+ * argument. To encode a value to be represented in a register field,
+ * the value and field ID are passed to ipa_reg_encode(). To extract
+ * a value encoded in a register field, the field ID is passed to
+ * ipa_reg_decode(). In addition, for single-bit fields, ipa_reg_bit()
+ * can be used to either encode the bit value, or to generate a mask
+ * used to extract the bit value.
*/

/* enum ipa_reg_id - IPA register IDs */
--
2.34.1
\
 
 \ /
  Last update: 2022-10-01 00:46    [W:0.043 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site