lkml.org 
[lkml]   [2022]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/8] arm64: dts: qcom: sdm845: Don't use 0x in unit address
Date
The gpi_dma1 node had the '0x' prefix in its unit address. Remove it,
as this is interpretet as hex anyway, and it's the preferred style.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index d761da47220d..0dcf713675dd 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1636,7 +1636,7 @@ uart7: serial@89c000 {
};
};

- gpi_dma1: dma-controller@0xa00000 {
+ gpi_dma1: dma-controller@a00000 {
#dma-cells = <3>;
compatible = "qcom,sdm845-gpi-dma";
reg = <0 0x00a00000 0 0x60000>;
--
2.37.3
\
 
 \ /
  Last update: 2022-09-30 21:13    [W:0.022 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site