lkml.org 
[lkml]   [2022]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 07/12] riscv: dts: allwinner: Add Allwinner D1 Nezha devicetree
Date
>>>>> "Samuel" == Samuel Holland <samuel@sholland.org> writes:

> "D1 Nezha" is Allwinner's first-party development board for the D1 SoC.
> It was shipped with 512M, 1G, or 2G of DDR3. It supports onboard audio,
> HDMI, gigabit Ethernet, WiFi and Bluetooth, USB 2.0 host and OTG ports,
> plus low-speed I/O from the SoC and a GPIO expander chip.

> Most other D1 boards copied the Nezha's power tree, with the 1.8V rail
> powered by the SoCs internal LDOA, analog domains powered by ALDO, and
> the rest of the board powered by always-on fixed regulators. Some (but
> not all) boards also copied the PWM CPU regulator. To avoid duplication,
> factor out the out the regulator references that are common across all

NIT: s/out the out the/out the/

--
Bye, Peter Korsgaard

\
 
 \ /
  Last update: 2022-09-03 17:22    [W:0.618 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site