lkml.org 
[lkml]   [2022]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 07/12] riscv: dts: allwinner: Add Allwinner D1 Nezha devicetree
Date
Am Montag, 15. August 2022, 07:08:10 CEST schrieb Samuel Holland:
> "D1 Nezha" is Allwinner's first-party development board for the D1 SoC.
> It was shipped with 512M, 1G, or 2G of DDR3. It supports onboard audio,
> HDMI, gigabit Ethernet, WiFi and Bluetooth, USB 2.0 host and OTG ports,
> plus low-speed I/O from the SoC and a GPIO expander chip.
>
> Most other D1 boards copied the Nezha's power tree, with the 1.8V rail
> powered by the SoCs internal LDOA, analog domains powered by ALDO, and
> the rest of the board powered by always-on fixed regulators. Some (but
> not all) boards also copied the PWM CPU regulator. To avoid duplication,
> factor out the out the regulator references that are common across all
> known boards.
>
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
>
> arch/riscv/boot/dts/allwinner/Makefile | 1 +
> .../sun20i-d1-common-regulators.dtsi | 51 ++++++
> .../boot/dts/allwinner/sun20i-d1-nezha.dts | 171 ++++++++++++++++++
> 3 files changed, 223 insertions(+)
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
>
> diff --git a/arch/riscv/boot/dts/allwinner/Makefile b/arch/riscv/boot/dts/allwinner/Makefile
> index f66554cd5c45..b0a15e8c8d82 100644
> --- a/arch/riscv/boot/dts/allwinner/Makefile
> +++ b/arch/riscv/boot/dts/allwinner/Makefile
> @@ -1 +1,2 @@
> # SPDX-License-Identifier: GPL-2.0
> +dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb
> diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
> new file mode 100644
> index 000000000000..143a3e710c3c
> --- /dev/null
> +++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>

in (most/all) other devicetrees this is looks more like

// SPDX-License-Identifier: (GPL-2.0+ or MIT)
/* Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org> */

otherwise
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>




\
 
 \ /
  Last update: 2022-08-16 11:57    [W:0.745 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site