lkml.org 
[lkml]   [2022]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/4] Documentation: rs485: Link reference properly
Date
Link DT bindings reference properly.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
Documentation/driver-api/serial/serial-rs485.rst | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/driver-api/serial/serial-rs485.rst b/Documentation/driver-api/serial/serial-rs485.rst
index 264e4b753713..513758a702a6 100644
--- a/Documentation/driver-api/serial/serial-rs485.rst
+++ b/Documentation/driver-api/serial/serial-rs485.rst
@@ -33,9 +33,9 @@ RS485 Serial Communications
communications. This data structure is used to set and configure RS485
parameters in the platform data and in ioctls.

- The device tree can also provide RS485 boot time parameters (see [1]
- for bindings). The driver is in charge of filling this data structure from
- the values given by the device tree.
+ The device tree can also provide RS485 boot time parameters
+ [#DT-bindings]_. The driver is in charge of filling this data structure
+ from the values given by the device tree.

Any driver for devices capable of working both as RS232 and RS485 should
implement the rs485_config callback and provide rs485_supported in the
@@ -129,4 +129,4 @@ RS485 Serial Communications
6. References
=============

- [1] Documentation/devicetree/bindings/serial/rs485.txt
+.. [#DT-bindings] Documentation/devicetree/bindings/serial/rs485.txt
--
2.30.2
\
 
 \ /
  Last update: 2022-09-28 13:09    [W:0.172 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site