lkml.org 
[lkml]   [2022]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 2/2] Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"
On Tue, Sep 27, 2022 at 8:53 AM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> This reverts commit 0f01017191384e3962fa31520a9fd9846c3d352f.
>
> As pointed out by Ferry this breaks Dual Role support on
> Intel Merrifield platforms.
>
> Fixes: 0f0101719138 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present")
> Reported-by: Ferry Toth <fntoth@gmail.com>
> Cc: stable@vger.kernel.org
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Tested-by: Ferry Toth <fntoth@gmail.com> # for Merrifield

Sven can you check that this also fixes the regression of your fix?

> ---
> drivers/usb/dwc3/core.c | 55 +----------------------------------------
> drivers/usb/dwc3/drd.c | 50 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 51 insertions(+), 54 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index c2b463469d51..219d797e2230 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -23,7 +23,6 @@
> #include <linux/delay.h>
> #include <linux/dma-mapping.h>
> #include <linux/of.h>
> -#include <linux/of_graph.h>
> #include <linux/acpi.h>
> #include <linux/pinctrl/consumer.h>
> #include <linux/reset.h>
> @@ -86,7 +85,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc)
> * mode. If the controller supports DRD but the dr_mode is not
> * specified or set to OTG, then set the mode to peripheral.
> */
> - if (mode == USB_DR_MODE_OTG && !dwc->edev &&
> + if (mode == USB_DR_MODE_OTG &&
> (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
> !device_property_read_bool(dwc->dev, "usb-role-switch")) &&
> !DWC3_VER_IS_PRIOR(DWC3, 330A))
> @@ -1668,51 +1667,6 @@ static void dwc3_check_params(struct dwc3 *dwc)
> }
> }
>
> -static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
> -{
> - struct device *dev = dwc->dev;
> - struct device_node *np_phy;
> - struct extcon_dev *edev = NULL;
> - const char *name;
> -
> - if (device_property_read_bool(dev, "extcon"))
> - return extcon_get_edev_by_phandle(dev, 0);
> -
> - /*
> - * Device tree platforms should get extcon via phandle.
> - * On ACPI platforms, we get the name from a device property.
> - * This device property is for kernel internal use only and
> - * is expected to be set by the glue code.
> - */
> - if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
> - edev = extcon_get_extcon_dev(name);
> - if (!edev)
> - return ERR_PTR(-EPROBE_DEFER);
> -
> - return edev;
> - }
> -
> - /*
> - * Try to get an extcon device from the USB PHY controller's "port"
> - * node. Check if it has the "port" node first, to avoid printing the
> - * error message from underlying code, as it's a valid case: extcon
> - * device (and "port" node) may be missing in case of "usb-role-switch"
> - * or OTG mode.
> - */
> - np_phy = of_parse_phandle(dev->of_node, "phys", 0);
> - if (of_graph_is_present(np_phy)) {
> - struct device_node *np_conn;
> -
> - np_conn = of_graph_get_remote_node(np_phy, -1, -1);
> - if (np_conn)
> - edev = extcon_find_edev_by_node(np_conn);
> - of_node_put(np_conn);
> - }
> - of_node_put(np_phy);
> -
> - return edev;
> -}
> -
> static int dwc3_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -1849,13 +1803,6 @@ static int dwc3_probe(struct platform_device *pdev)
> goto err2;
> }
>
> - dwc->edev = dwc3_get_extcon(dwc);
> - if (IS_ERR(dwc->edev)) {
> - ret = PTR_ERR(dwc->edev);
> - dev_err_probe(dwc->dev, ret, "failed to get extcon\n");
> - goto err3;
> - }
> -
> ret = dwc3_get_dr_mode(dwc);
> if (ret)
> goto err3;
> diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
> index 039bf241769a..8cad9e7d3368 100644
> --- a/drivers/usb/dwc3/drd.c
> +++ b/drivers/usb/dwc3/drd.c
> @@ -8,6 +8,7 @@
> */
>
> #include <linux/extcon.h>
> +#include <linux/of_graph.h>
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> #include <linux/property.h>
> @@ -438,6 +439,51 @@ static int dwc3_drd_notifier(struct notifier_block *nb,
> return NOTIFY_DONE;
> }
>
> +static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
> +{
> + struct device *dev = dwc->dev;
> + struct device_node *np_phy;
> + struct extcon_dev *edev = NULL;
> + const char *name;
> +
> + if (device_property_read_bool(dev, "extcon"))
> + return extcon_get_edev_by_phandle(dev, 0);
> +
> + /*
> + * Device tree platforms should get extcon via phandle.
> + * On ACPI platforms, we get the name from a device property.
> + * This device property is for kernel internal use only and
> + * is expected to be set by the glue code.
> + */
> + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
> + edev = extcon_get_extcon_dev(name);
> + if (!edev)
> + return ERR_PTR(-EPROBE_DEFER);
> +
> + return edev;
> + }
> +
> + /*
> + * Try to get an extcon device from the USB PHY controller's "port"
> + * node. Check if it has the "port" node first, to avoid printing the
> + * error message from underlying code, as it's a valid case: extcon
> + * device (and "port" node) may be missing in case of "usb-role-switch"
> + * or OTG mode.
> + */
> + np_phy = of_parse_phandle(dev->of_node, "phys", 0);
> + if (of_graph_is_present(np_phy)) {
> + struct device_node *np_conn;
> +
> + np_conn = of_graph_get_remote_node(np_phy, -1, -1);
> + if (np_conn)
> + edev = extcon_find_edev_by_node(np_conn);
> + of_node_put(np_conn);
> + }
> + of_node_put(np_phy);
> +
> + return edev;
> +}
> +
> #if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
> #define ROLE_SWITCH 1
> static int dwc3_usb_role_switch_set(struct usb_role_switch *sw,
> @@ -542,6 +588,10 @@ int dwc3_drd_init(struct dwc3 *dwc)
> device_property_read_bool(dwc->dev, "usb-role-switch"))
> return dwc3_setup_role_switch(dwc);
>
> + dwc->edev = dwc3_get_extcon(dwc);
> + if (IS_ERR(dwc->edev))
> + return PTR_ERR(dwc->edev);
> +
> if (dwc->edev) {
> dwc->edev_nb.notifier_call = dwc3_drd_notifier;
> ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
> --
> 2.35.1
>

\
 
 \ /
  Last update: 2022-09-29 05:03    [W:0.262 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site