lkml.org 
[lkml]   [2022]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] arm64: dts: exynos: fix polarity of "enable" line of NFC chip
Date
According to s3fwrn5 driver code the "enable" GPIO line is driven "high"
when chip is not in use (mode is S3FWRN5_MODE_COLD), and is driven "low"
when chip is in use.

s3fwrn5_phy_power_ctrl():

...
gpio_set_value(phy->gpio_en, 1);
...
if (mode != S3FWRN5_MODE_COLD) {
msleep(S3FWRN5_EN_WAIT_TIME);
gpio_set_value(phy->gpio_en, 0);
msleep(S3FWRN5_EN_WAIT_TIME);
}

Therefore the line described by "en-gpios" property should be annotated
as "active low".

The wakeup gpio appears to have correct polarity (active high).

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 91c9bd1b47dd..bde6a6bb8dfc 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -795,7 +795,7 @@ s3fwrn5: nfc@27 {
reg = <0x27>;
interrupt-parent = <&gpa1>;
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
- en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
+ en-gpios = <&gpf1 4 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
};
};
--
2.38.0.rc1.362.ged0d419d3c-goog
\
 
 \ /
  Last update: 2022-09-29 03:17    [W:0.059 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site