lkml.org 
[lkml]   [2022]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] xhci: print warning when HCE was set
Hi

On 15.9.2022 4.11, Longfang Liu wrote:
> When HCE(Host Controller Error) is set, it means that the xhci hardware
> controller has an error at this time, but the current xhci driver
> software does not log this event.
>
> By adding an HCE event detection in the xhci interrupt processing
> interface, a warning log is output to the system, which is convenient
> for system device status tracking.
>

xHC should cease all activity when it sets HCE, and is probably not
generating interrupts anymore.

Would probably be more useful to check for HCE at timeouts than in the
interrupt handler.

If this is something seen on actual hardware then it makes sense to add it.

Thanks
-Mathias

\
 
 \ /
  Last update: 2022-09-22 15:01    [W:0.083 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site