lkml.org 
[lkml]   [2022]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: Similar SoCs with different CPUs and interrupt bindings
Hi Krzysztof,

On Wed, Sep 21, 2022 at 9:53 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 21/09/2022 09:46, Geert Uytterhoeven wrote:
> > Hi Rob, Krzysztof,
> >
> > This is a topic that came up at the RISC-V BoF at Plumbers, and it was
> > suggested to bring it up with you.
>
> I guess you also need SoC maintainers as well (+Cc Arnd and Olof). :)
>
> >
> > The same SoC may be available with either RISC-V or other (e.g. ARM) CPU
> > cores (an example of this are the Renesas RZ/Five and RZ/G2UL SoCs).
> > To avoid duplication, we would like to have:
> > - <riscv-soc>.dtsi includes <base-soc>.dtsi,
> > - <arm-soc>.dtsi includes <base-soc>.dtsi.
> >
> > Unfortunately RISC-V and ARM typically use different types of interrupt
> > controllers, using different bindings (e.g. 2-cell vs. 3-cell), and
> > possibly using different interrupt numbers. Hence the interrupt-parent
> > and interrupts{-extended} properties should be different, too.
> >
> > Possible solutions[1]:
> > 1. interrupt-map
> >
> > 2. Use a SOC_PERIPHERAL_IRQ() macro in interrupts properties in
> > <base-soc>.dtsi, with
> > - #define SOC_PERIPHERAL_IRQ(nr, na) nr // RISC-V
> > - #define SOC_PERIPHERAL_IRQ(nr, na) GIC_SPI na // ARM
> > Note that the cpp/dtc combo does not support arithmetic, so even
> > the simple case where nr = 32 + na cannot be simplified.
>
> What do you mean? Macros support string concatenation and simple
> arithmetic like adding numbers. I just tested it.
>
I did try the below:

diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
index 689aa4ba416b..0f923c276cd3 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
@@ -8,6 +8,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/r9a07g043-cpg.h>

+#define SOC_PERIPHERAL_IRQ(nr, na) GIC_SPI nr na
+
/ {
compatible = "renesas,r9a07g043";
#address-cells = <2>;
@@ -128,7 +130,7 @@ ssi1: ssi@1004a000 {
compatible = "renesas,r9a07g043-ssi",
"renesas,rz-ssi";
reg = <0 0x1004a000 0 0x400>;
- interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts = <SOC_PERIPHERAL_IRQ(330, IRQ_TYPE_LEVEL_HIGH)>,
<GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 332 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 333 IRQ_TYPE_EDGE_RISING>;
This worked as expected, but couldn't get the arithmetic operation
working. Could you please provide an example?

Cheers,
Prabhakar

\
 
 \ /
  Last update: 2022-09-21 11:23    [W:2.479 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site