lkml.org 
[lkml]   [2022]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: dwc3: gadget: Do not clear ep delayed stop flag during ep disable
Date
DWC3_EP_DELAYED_STOP is utilized to defer issuing the end transfer command
until the subsequent SETUP stage, in order to avoid end transfer timeouts.
During cable disconnect scenarios, __dwc3_gadget_ep_disable() is
responsible for ensuring endpoints have no active transfers pending. Since
dwc3_remove_request() can now exit early if the EP delayed stop is set,
avoid clearing all DEP flags, otherwise the transition back into the SETUP
stage won't issue an endxfer command.

Fixes: 2b2da6574e77 ("usb: dwc3: Avoid unmapping USB requests if endxfer is not complete")
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
drivers/usb/dwc3/gadget.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index b75e1b8b3f05..3e2baf22824b 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1011,6 +1011,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
{
struct dwc3 *dwc = dep->dwc;
u32 reg;
+ u32 mask;

trace_dwc3_gadget_ep_disable(dep);

@@ -1032,7 +1033,15 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)

dep->stream_capable = false;
dep->type = 0;
- dep->flags &= DWC3_EP_TXFIFO_RESIZED;
+ mask = DWC3_EP_TXFIFO_RESIZED;
+ /*
+ * dwc3_remove_requests() can exit early if DWC3 EP delayed stop is
+ * set. Do not clear DEP flags, so that the end transfer command will
+ * be reattempted during the next SETUP stage.
+ */
+ if (dep->flags & DWC3_EP_DELAY_STOP)
+ mask |= (DWC3_EP_DELAY_STOP | DWC3_EP_TRANSFER_STARTED);
+ dep->flags &= mask;

return 0;
}
\
 
 \ /
  Last update: 2022-09-20 01:18    [W:0.048 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site