lkml.org 
[lkml]   [2022]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/6] phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J721e
From
Hi Siddharth,

On 14/09/2022 12:39, Siddharth Vadapalli wrote:
> Each of the CPSW9G ports in J721e support additional modes like QSGMII.
> Add a new compatible for J721e to support the additional modes.
>
> In TI's J721e, each of the CPSW9G ethernet interfaces can act as a
> QSGMII main or QSGMII-SUB port. The QSGMII main interface is responsible
> for performing auto-negotiation between the MAC and the PHY while the rest
> of the interfaces are designated as QSGMII-SUB interfaces, indicating that
> they will not be taking part in the auto-negotiation process.
>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> ---
> drivers/phy/ti/phy-gmii-sel.c | 47 +++++++++++++++++++++++++++--------
> 1 file changed, 37 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
> index f0b2ba7a9c96..fdb1a7db123d 100644
> --- a/drivers/phy/ti/phy-gmii-sel.c
> +++ b/drivers/phy/ti/phy-gmii-sel.c
> @@ -223,6 +223,13 @@ struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw5g_soc_j7200 = {
> .extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) | BIT(PHY_INTERFACE_MODE_SGMII),
> };
>
> +static const
> +struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw9g_soc_j721e = {
> + .use_of_data = true,
> + .regfields = phy_gmii_sel_fields_am654,
> + .extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII),
> +};
> +
> static const struct of_device_id phy_gmii_sel_id_table[] = {
> {
> .compatible = "ti,am3352-phy-gmii-sel",
> @@ -248,6 +255,10 @@ static const struct of_device_id phy_gmii_sel_id_table[] = {
> .compatible = "ti,j7200-cpsw5g-phy-gmii-sel",
> .data = &phy_gmii_sel_cpsw5g_soc_j7200,
> },
> + {
> + .compatible = "ti,j721e-cpsw9g-phy-gmii-sel",
> + .data = &phy_gmii_sel_cpsw9g_soc_j721e,
> + },
> {}
> };
> MODULE_DEVICE_TABLE(of, phy_gmii_sel_id_table);
> @@ -389,7 +400,7 @@ static int phy_gmii_sel_probe(struct platform_device *pdev)
> struct device_node *node = dev->of_node;
> const struct of_device_id *of_id;
> struct phy_gmii_sel_priv *priv;
> - u32 main_ports = 1;
> + u32 main_ports[2] = {1, 1};
> int ret;
>
> of_id = of_match_node(phy_gmii_sel_id_table, pdev->dev.of_node);
> @@ -403,15 +414,31 @@ static int phy_gmii_sel_probe(struct platform_device *pdev)
> priv->dev = &pdev->dev;
> priv->soc_data = of_id->data;
> priv->num_ports = priv->soc_data->num_ports;
> - of_property_read_u32(node, "ti,qsgmii-main-ports", &main_ports);
> - /*
> - * Ensure that main_ports is within bounds. If the property
> - * ti,qsgmii-main-ports is not mentioned, or the value mentioned
> - * is out of bounds, default to 1.
> - */
> - if (main_ports < 1 || main_ports > 4)
> - main_ports = 1;
> - priv->qsgmii_main_ports = PHY_GMII_PORT(main_ports);
> + /* Differentiate between J7200 CPSW5G and J721e CPSW9G */
> + if (of_device_is_compatible(node, "ti,j7200-cpsw5g-phy-gmii-sel") > 0) {

Why not just "if (of_device_is_compatible())" ?

> + of_property_read_u32(node, "ti,qsgmii-main-ports", &main_ports[0]);
> + /*
> + * Ensure that main_ports is within bounds. If the property
> + * ti,qsgmii-main-ports is not mentioned, or the value mentioned
> + * is out of bounds, default to 1.
> + */
> + if (main_ports[0] < 1 || main_ports[0] > 4)
> + main_ports[0] = 1;

how about printing this issue with dev_err()?

> + priv->qsgmii_main_ports = PHY_GMII_PORT(main_ports[0]);
> + } else if (of_device_is_compatible(node, "ti,j721e-cpsw9g-phy-gmii-sel") > 0) {
> + of_property_read_u32_array(node, "ti,qsgmii-main-ports", &main_ports[0], 2);
> + /*
> + * Ensure that main_ports is within bounds. If the property
> + * ti,qsgmii-main-ports is not mentioned, or the value mentioned
> + * is out of bounds, default to 1.
> + */
> + if (main_ports[0] < 1 || main_ports[0] > 8)
> + main_ports[0] = 1;
> + if (main_ports[1] < 1 || main_ports[1] > 8)
> + main_ports[1] = 1;
> + priv->qsgmii_main_ports = PHY_GMII_PORT(main_ports[0]);
> + priv->qsgmii_main_ports |= PHY_GMII_PORT(main_ports[1]);
> + }

The whole if/else logic can be got rid of if you store num_qsgmii_main_ports in priv data structure
after obtaining it from of_data.

Then all the above reduces to
for (i = 0; i < priv->num_qsgmii_main_ports; i++) {
if (main_ports[i] ...)
}

It will also make it very easy to scale later on for future platforms.

>
> priv->regmap = syscon_node_to_regmap(node->parent);
> if (IS_ERR(priv->regmap)) {

cheers,
-roger

\
 
 \ /
  Last update: 2022-09-14 13:36    [W:0.131 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site