lkml.org 
[lkml]   [2022]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] phy: qualcomm: call clk_disable_unprepare in the error handling
Date
From: Dongliang Mu <mudongliangabcd@gmail.com>

Smatch reports the following error:

drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->cal_clk' from clk_prepare_enable() not released on lines:
58.
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->cal_sleep_clk' from clk_prepare_enable() not released on
lines: 58.
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->phy_clk' from clk_prepare_enable() not released on lines:
58.

Fix this by calling proper clk_disable_unprepare calls.

Fixes: 0b56e9a7e835 ("phy: Group vendor specific phy drivers")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
---
drivers/phy/qualcomm/phy-qcom-usb-hsic.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hsic.c b/drivers/phy/qualcomm/phy-qcom-usb-hsic.c
index 716a77748ed8..20f6dd37c7c1 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hsic.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hsic.c
@@ -54,8 +54,10 @@ static int qcom_usb_hsic_phy_power_on(struct phy *phy)

/* Configure pins for HSIC functionality */
pins_default = pinctrl_lookup_state(uphy->pctl, PINCTRL_STATE_DEFAULT);
- if (IS_ERR(pins_default))
- return PTR_ERR(pins_default);
+ if (IS_ERR(pins_default)) {
+ ret = PTR_ERR(pins_default);
+ goto err_ulpi;
+ }

ret = pinctrl_select_state(uphy->pctl, pins_default);
if (ret)
--
2.35.1
\
 
 \ /
  Last update: 2022-09-14 07:19    [W:0.060 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site