lkml.org 
[lkml]   [2022]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/11] perf test: test_intel_pt.sh: Add per-thread test
Date
When tracing the kernel with Intel PT, text_poke events are recorded
per-cpu. In per-thread mode that results in a mixture of per-thread and
per-cpu events and mmaps. Check that happens correctly.

The debug output from perf record -vvv is recorded and then awk used to
process the debug messages that indicate what file descriptors were opened
and whether they were mmapped or set-output.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
tools/perf/tests/shell/test_intel_pt.sh | 247 ++++++++++++++++++++++++
1 file changed, 247 insertions(+)

diff --git a/tools/perf/tests/shell/test_intel_pt.sh b/tools/perf/tests/shell/test_intel_pt.sh
index 2d489de9097b..051d088c1b74 100755
--- a/tools/perf/tests/shell/test_intel_pt.sh
+++ b/tools/perf/tests/shell/test_intel_pt.sh
@@ -4,6 +4,8 @@

set -e

+tenths=date\ +%s%1N
+
# Skip if no Intel PT
perf list | grep -q 'intel_pt//' || exit 2

@@ -15,6 +17,10 @@ temp_dir=$(mktemp -d /tmp/perf-test-intel-pt-sh.XXXXXXXXXX)

tmpfile="${temp_dir}/tmp-perf.data"
perfdatafile="${temp_dir}/test-perf.data"
+outfile="${temp_dir}/test-out.txt"
+errfile="${temp_dir}/test-err.txt"
+workload="${temp_dir}/workload"
+awkscript="${temp_dir}/awkscript"

cleanup()
{
@@ -35,6 +41,37 @@ trap_cleanup()

trap trap_cleanup EXIT TERM INT

+have_workload=false
+cat << _end_of_file_ | /usr/bin/cc -o "${workload}" -xc - -pthread && have_workload=true
+#include <time.h>
+#include <pthread.h>
+
+void work(void) {
+ struct timespec tm = {
+ .tv_nsec = 1000000,
+ };
+ int i;
+
+ /* Run for about 30 seconds */
+ for (i = 0; i < 30000; i++)
+ nanosleep(&tm, NULL);
+}
+
+void *threadfunc(void *arg) {
+ work();
+ return NULL;
+}
+
+int main(void) {
+ pthread_t th;
+
+ pthread_create(&th, NULL, threadfunc, NULL);
+ work();
+ pthread_join(th, NULL);
+ return 0;
+}
+_end_of_file_
+
can_cpu_wide()
{
echo "Checking for CPU-wide recording on CPU $1"
@@ -69,6 +106,214 @@ test_system_wide_side_band()
return 1
}

+can_kernel()
+{
+ perf record -o "${tmpfile}" -B -N --no-bpf-event -e dummy:k true >/dev/null 2>&1 || return 2
+ return 0
+}
+
+wait_for_threads()
+{
+ start_time=$($tenths)
+ while [ -e "/proc/$1/task" ] ; do
+ th_cnt=$(find "/proc/$1/task" -mindepth 1 -maxdepth 1 -printf x | wc -c)
+ if [ "${th_cnt}" -ge "$2" ] ; then
+ return 0
+ fi
+ # Wait at most 5 seconds
+ if [ $(($($tenths) - start_time)) -ge 50 ] ; then
+ echo "PID $1 does not have $2 threads"
+ return 1
+ fi
+ done
+ return 1
+}
+
+wait_for_perf_to_start()
+{
+ echo "Waiting for \"perf record has started\" message"
+ start_time=$($tenths)
+ while [ -e "/proc/$1" ] ; do
+ if grep -q "perf record has started" "${errfile}" ; then
+ echo OK
+ break
+ fi
+ # Wait at most 5 seconds
+ if [ $(($($tenths) - start_time)) -ge 50 ] ; then
+ echo "perf recording did not start"
+ return 1
+ fi
+ done
+ return 0
+}
+
+wait_for_process_to_exit()
+{
+ start_time=$($tenths)
+ while [ -e "/proc/$1" ] ; do
+ # Wait at most 5 seconds
+ if [ $(($($tenths) - start_time)) -ge 50 ] ; then
+ echo "PID $1 did not exit as expected"
+ return 1
+ fi
+ done
+ return 0
+}
+
+is_running()
+{
+ start_time=$($tenths)
+ while [ -e "/proc/$1" ] ; do
+ # Check for at least 0.3s
+ if [ $(($($tenths) - start_time)) -gt 3 ] ; then
+ return 0
+ fi
+ done
+ echo "PID $1 exited prematurely"
+ return 1
+}
+
+test_per_thread()
+{
+ k="$1"
+ desc="$2"
+
+ echo "--- Test per-thread ${desc}recording ---"
+
+ if ! $have_workload ; then
+ echo "No workload, so skipping"
+ return 2
+ fi
+
+ if [ "${k}" = "k" ] ; then
+ can_kernel || return 2
+ fi
+
+ cat <<- "_end_of_file_" > "${awkscript}"
+ BEGIN {
+ s = "[ ]*"
+ u = s"[0-9]+"s
+ d = s"[0-9-]+"s
+ x = s"[0-9a-fA-FxX]+"s
+ mmapping = "idx"u": mmapping fd"u
+ set_output = "idx"u": set output fd"u"->"u
+ perf_event_open = "sys_perf_event_open: pid"d"cpu"d"group_fd"d"flags"x"="u
+ }
+
+ /perf record opening and mmapping events/ {
+ if (!done)
+ active = 1
+ }
+
+ /perf record done opening and mmapping events/ {
+ active = 0
+ done = 1
+ }
+
+ $0 ~ perf_event_open && active {
+ match($0, perf_event_open)
+ $0 = substr($0, RSTART, RLENGTH)
+ pid = $3
+ cpu = $5
+ fd = $11
+ print "pid " pid " cpu " cpu " fd " fd " : " $0
+ fd_array[fd] = fd
+ pid_array[fd] = pid
+ cpu_array[fd] = cpu
+ }
+
+ $0 ~ mmapping && active {
+ match($0, mmapping)
+ $0 = substr($0, RSTART, RLENGTH)
+ fd = $5
+ print "fd " fd " : " $0
+ if (fd in fd_array) {
+ mmap_array[fd] = 1
+ } else {
+ print "Unknown fd " fd
+ exit 1
+ }
+ }
+
+ $0 ~ set_output && active {
+ match($0, set_output)
+ $0 = substr($0, RSTART, RLENGTH)
+ fd = $6
+ fd_to = $8
+ print "fd " fd " fd_to " fd_to " : " $0
+ if (fd in fd_array) {
+ if (fd_to in fd_array) {
+ set_output_array[fd] = fd_to
+ } else {
+ print "Unknown fd " fd_to
+ exit 1
+ }
+ } else {
+ print "Unknown fd " fd
+ exit 1
+ }
+ }
+
+ END {
+ print "Checking " length(fd_array) " fds"
+ for (fd in fd_array) {
+ if (fd in mmap_array) {
+ pid = pid_array[fd]
+ if (pid != -1) {
+ if (pid in pids) {
+ print "More than 1 mmap for PID " pid
+ exit 1
+ }
+ pids[pid] = 1
+ }
+ cpu = cpu_array[fd]
+ if (cpu != -1) {
+ if (cpu in cpus) {
+ print "More than 1 mmap for CPU " cpu
+ exit 1
+ }
+ cpus[cpu] = 1
+ }
+ } else if (!(fd in set_output_array)) {
+ print "No mmap for fd " fd
+ exit 1
+ }
+ }
+ n = length(pids)
+ if (n != thread_cnt) {
+ print "Expected " thread_cnt " per-thread mmaps - found " n
+ exit 1
+ }
+ }
+ _end_of_file_
+
+ $workload &
+ w1=$!
+ $workload &
+ w2=$!
+ echo "Workload PIDs are $w1 and $w2"
+ wait_for_threads ${w1} 2
+ wait_for_threads ${w2} 2
+
+ perf record -B -N --no-bpf-event -o "${perfdatafile}" -e intel_pt//u"${k}" -vvv --per-thread -p "${w1},${w2}" 2>"${errfile}" >"${outfile}" &
+ ppid=$!
+ echo "perf PID is $ppid"
+ wait_for_perf_to_start ${ppid} || return 1
+
+ kill ${w1}
+ wait_for_process_to_exit ${w1} || return 1
+ is_running ${ppid} || return 1
+
+ kill ${w2}
+ wait_for_process_to_exit ${w2} || return 1
+ wait_for_process_to_exit ${ppid} || return 1
+
+ awk -v thread_cnt=4 -f "${awkscript}" "${errfile}" || return 1
+
+ echo OK
+ return 0
+}
+
count_result()
{
if [ "$1" -eq 2 ] ; then
@@ -85,6 +330,8 @@ count_result()

ret=0
test_system_wide_side_band || ret=$? ; count_result $ret
+test_per_thread "" "" || ret=$? ; count_result $ret
+test_per_thread "k" "(incl. kernel) " || ret=$? ; count_result $ret

cleanup

--
2.25.1
\
 
 \ /
  Last update: 2022-09-12 10:35    [W:0.777 / U:2.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site