lkml.org 
[lkml]   [2022]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v6 0/2] rcu/nocb: Delete local variable 'need_rcu_nocb_mask' in rcu_init_nohz()
Date
v5 --> v6:
1. Frist, update patch 1/2, so that, CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y takes
effect only when there are no 'rcu_nocbs=' and 'nohz_full='. Retain the same
semantics as the original.
2. Then, add patch 2/2, so that, CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y takes effect
as long as there is no "rcu_nocbs=" boot parameter. This is suggested by
Frederic Weisbecker.

Test cases and test results as below:
----------------------------------------------------------------------
| CONFIG_NO_HZ_FULL | CONFIG_RCU_NOCB_CPU_DEFAULT_ALL | cmdline |
----------------------------------------------------------------------
1) N | N | none |
2) N | N | rcu_nocbs=1-2 |
3) Y | N | nohz_full=2-3 |
4) Y | N | rcu_nocbs=1 nohz_full=3 |
5) Y | Y | none |
6) Y | Y | rcu_nocbs=1-2 |
7) Y | Y | nohz_full=2-3 |
8) Y | Y | rcu_nocbs=1 nohz_full=3 |
----------------------------------------------------------------------

dmesg | grep "Offload RCU callbacks"
1) none
2) Offload RCU callbacks from CPUs: 1-2.
3) Offload RCU callbacks from CPUs: 2-3.
4) Offload RCU callbacks from CPUs: 1,3.
5) Offload RCU callbacks from CPUs: 0-3.
6) Offload RCU callbacks from CPUs: 1-2.
7) Offload RCU callbacks from CPUs: 0-3.
8) Offload RCU callbacks from CPUs: 1,3.


v4 --> v5:
1. Cancel eliminate rcu_state.nocb_is_setup. It is useful for case 1) below.

Test cases and test results as below:
----------------------------------------------------------------------
| CONFIG_NO_HZ_FULL | CONFIG_RCU_NOCB_CPU_DEFAULT_ALL | cmdline |
----------------------------------------------------------------------
1) N | N | none |
2) N | N | rcu_nocbs=1-2 |
3) Y | N | nohz_full=1-2 |
4) Y | Y | none |
----------------------------------------------------------------------

1)
[ 1018.082417] rcu-torture:--- End of test: SUCCESS (default)
root@genericarmv8:~# dmesg | grep "Offload RCU callbacks"

root@genericarmv8:~# zcat /proc/config.gz | grep NOCB
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
root@genericarmv8:~# zcat /proc/config.gz | grep NO_HZ_FULL
# CONFIG_NO_HZ_FULL is not set
root@genericarmv8:~# cat /proc/cmdline
console=ttyS0 earlyprintk=serial root=/dev/sda rw

2) 3) 4)
The same to v4.


v3 --> v4:
Fix a build warning.
- struct cpumask *cpumask = NULL;
+ const struct cpumask *cpumask = NULL;

v2 --> v3:
1. Eliminate rcu_state.nocb_is_setup
2. Update the code based on the above patch and commit b37a667c6242
("rcu/nocb: Add an option to offload all CPUs on boot").

Test cases and test results as below:

----------------------------------------------------------------------
| CONFIG_NO_HZ_FULL | CONFIG_RCU_NOCB_CPU_DEFAULT_ALL | cmdline |
----------------------------------------------------------------------
1) N | N | none |
2) N | N | rcu_nocbs=1-2 |
3) Y | N | nohz_full=1-2 |
4) Y | Y | none |
----------------------------------------------------------------------

1)
[ 1085.691770] rcu-torture:--- End of test: SUCCESS: (default)
root@genericarmv8:~# dmesg | grep "Offload RCU callbacks"
[ 0.000000] rcu: Offload RCU callbacks from CPUs: (none).
root@genericarmv8:~# zcat /proc/config.gz | grep NOCB
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
root@genericarmv8:~# zcat /proc/config.gz | grep NO_HZ_FULL
# CONFIG_NO_HZ_FULL is not set
root@genericarmv8:~# cat /proc/cmdline
console=ttyAMA0 root=/dev/vda2 crashkernel=256M@ee000000

2)
[ 1022.532198] rcu-torture:--- End of test: SUCCESS: (default)
root@genericarmv8:~# dmesg | grep "Offload RCU callbacks"
[ 0.000000] rcu: Offload RCU callbacks from CPUs: 1-2.
root@genericarmv8:~# zcat /proc/config.gz | grep NOCB
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
root@genericarmv8:~# zcat /proc/config.gz | grep NO_HZ_FULL
# CONFIG_NO_HZ_FULL is not set
root@genericarmv8:~# cat /proc/cmdline
console=ttyAMA0 root=/dev/vda2 crashkernel=256M@ee000000 rcu_nocbs=1-2

3)
[ 1011.714712] rcu-torture:--- End of test: SUCCESS: (default)
root@genericarmv8:~# dmesg | grep "Offload RCU callbacks"
[ 0.000000] rcu: Offload RCU callbacks from CPUs: 1-2.
root@genericarmv8:~# zcat /proc/config.gz | grep NOCB
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
root@genericarmv8:~# zcat /proc/config.gz | grep NO_HZ_FULL
CONFIG_NO_HZ_FULL=y
root@genericarmv8:~# cat /proc/cmdline
console=ttyAMA0 root=/dev/vda2 crashkernel=256M@ee000000 nohz_full=1-2

4)
[ 1031.047094] rcu-torture:--- End of test: SUCCESS: (default)
root@genericarmv8:~# dmesg | grep "Offload RCU callbacks"
[ 0.000000] rcu: Offload RCU callbacks from CPUs: 0-3.
root@genericarmv8:~# zcat /proc/config.gz | grep NOCB
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y
root@genericarmv8:~# zcat /proc/config.gz | grep NO_HZ_FULL
CONFIG_NO_HZ_FULL=y
root@genericarmv8:~# cat /proc/cmdline
console=ttyAMA0 root=/dev/vda2 crashkernel=256M@ee000000


v1 --> v2:
Update commit message.

Zhen Lei (2):
rcu: Simplify rcu_init_nohz() cpumask handling
rcu: Offload callback processing from all CPUs in the absence of
rcu_nocbs=

kernel/rcu/Kconfig | 4 ++--
kernel/rcu/tree_nocb.h | 35 ++++++++++++-----------------------
2 files changed, 14 insertions(+), 25 deletions(-)

--
2.25.1

\
 
 \ /
  Last update: 2022-09-01 15:19    [W:0.817 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site