Messages in this thread Patch in this message | | | From | Matthias Kaehlcke <> | Subject | [PATCH v2] arm64: dts: qcom: sc7180: Configure USB as wakeup source | Date | Thu, 1 Sep 2022 10:29:50 -0700 |
| |
The dwc3 USB controller of the sc7180 supports USB remote wakeup, configure it as a wakeup source.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org> ---
Changes in v2: - use qcom/arm64-for-6.1 as base, v1 was unintendedly based on a downstream branch that was used for testing
arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index e8debb0da411..af5bab27eaf3 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2782,6 +2782,8 @@ usb_1: usb@a6f8800 { <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>; interconnect-names = "usb-ddr", "apps-usb"; + wakeup-source; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xe000>; -- 2.37.2.789.g6183377224-goog
| |