lkml.org 
[lkml]   [2022]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: qcom: sc7180: Configure USB as wakeup source
Date
The dwc3 USB controller of the sc7180 supports USB remote
wakeup, configure it as a wakeup source.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---

arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 2d1f38342858..507718f309e1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2780,7 +2780,9 @@ usb_1: usb@a6f8800 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
interconnect-names = "usb-ddr", "apps-usb";

- usb_1_dwc3: dwc3@a600000 {
+ wakeup-source;
+
+ usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xe000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
--
2.37.2.789.g6183377224-goog
\
 
 \ /
  Last update: 2022-09-01 19:18    [W:0.247 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site