lkml.org 
[lkml]   [2022]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH] Bluetooth: Ignore cmd_timeout with HCI_USER_CHANNEL
From
From: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>

When using HCI_USER_CHANNEL, hci traffic is expected to be handled by
userspace entirely. However, it is still possible (and sometimes
desirable) to be able to send commands to the controller directly. In
such cases, the kernel command timeout shouldn't do any error handling.

Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
---
This was tested by running a userchannel stack and sending commands via
hcitool cmd on an Intel AX200 controller. Without this change, each
command sent via hcitool would result in hci_cmd_timeout being called
and after 5 commands, the controller would reset.

Hcitool continues working here because it marks the socket as
promiscuous and gets a copy of all traffic while the socket is open (and
does filtering in userspace).

Tested on Chromebook with 5.4 kernel with patch (and applied cleanly on
bluetooth-next).

net/bluetooth/hci_core.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index b3a5a3cc9372..c9a15f6633f7 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1481,17 +1481,25 @@ static void hci_cmd_timeout(struct work_struct *work)
struct hci_dev *hdev = container_of(work, struct hci_dev,
cmd_timer.work);

- if (hdev->sent_cmd) {
- struct hci_command_hdr *sent = (void *) hdev->sent_cmd->data;
- u16 opcode = __le16_to_cpu(sent->opcode);
+ /* Don't trigger the timeout behavior if it happens while we're in
+ * userchannel mode. Userspace is responsible for handling any command
+ * timeouts.
+ */
+ if (!(hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
+ test_bit(HCI_UP, &hdev->flags))) {
+ if (hdev->sent_cmd) {
+ struct hci_command_hdr *sent =
+ (void *)hdev->sent_cmd->data;
+ u16 opcode = __le16_to_cpu(sent->opcode);

- bt_dev_err(hdev, "command 0x%4.4x tx timeout", opcode);
- } else {
- bt_dev_err(hdev, "command tx timeout");
- }
+ bt_dev_err(hdev, "command 0x%4.4x tx timeout", opcode);
+ } else {
+ bt_dev_err(hdev, "command tx timeout");
+ }

- if (hdev->cmd_timeout)
- hdev->cmd_timeout(hdev);
+ if (hdev->cmd_timeout)
+ hdev->cmd_timeout(hdev);
+ }

atomic_set(&hdev->cmd_cnt, 1);
queue_work(hdev->workqueue, &hdev->cmd_work);
--
2.37.1.559.g78731f0fdb-goog
\
 
 \ /
  Last update: 2022-08-08 20:05    [W:0.097 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site