lkml.org 
[lkml]   [2022]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] drm/bridge: sii902x: add support for DRM_BRIDGE_ATTACH_NO_CONNECTOR
From
On 08/08/2022 11:15, Neil Armstrong wrote:
> Hi Dmitry,
>
> On 31/07/2022 22:07, Dmitry Osipenko wrote:
>> 13.01.2022 17:43, Neil Armstrong пишет:
>>> This adds support for DRM_BRIDGE_ATTACH_NO_CONNECTOR by adding the
>>> bridge get_edid() and detect() callbacks after refactoring the connector
>>> get_modes() and connector_detect() callbacks.
>>>
>>> In order to keep the bridge working, extra code in get_modes() has been
>>> moved to more logical places.
>>>
>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>>> ---
>>>   drivers/gpu/drm/bridge/sii902x.c | 129 ++++++++++++++++++++++++-------
>
> 1 file changed, 99 insertions(+), 30 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
>>> index 89558e581530..65549fbfdc87 100644
>>> --- a/drivers/gpu/drm/bridge/sii902x.c
>>> +++ b/drivers/gpu/drm/bridge/sii902x.c

[...]

>>>       }
>>> +    endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 1, -1);
>>> +    if (endpoint) {
>>> +        struct device_node *remote = of_graph_get_remote_port_parent(endpoint);
>>> +
>>> +        of_node_put(endpoint);
>>> +        if (!remote) {
>>> +            dev_err(dev, "Endpoint in port@1 unconnected\n");
>>> +            return -ENODEV;
>>> +        }
>>> +
>>> +        if (!of_device_is_available(remote)) {
>>> +            dev_err(dev, "port@1 remote device is disabled\n");
>>> +            of_node_put(remote);
>>> +            return -ENODEV;
>>> +        }
>>> +
>>> +        sii902x->next_bridge = of_drm_find_bridge(remote);
>>> +        of_node_put(remote);
>>> +        if (!sii902x->next_bridge)
>>> +            return -EPROBE_DEFER;
>>
>> Hi,
>>
>> This patch broke ARM/QEMU vexpress display because of_drm_find_bridge()
>> always fail with -EPROBE_DEFER. Reverting this patch returns display
>> back. Please fix or revert, thanks in advance.
>
> Can you share a QEMU cmdline to reproduce ?

Actually the vexpress DT has multiple input ports instead of a single input port at @0
and an output port at @1 like documented in the bindings:

vexpress-v2m.dtsi#L303-L307:
ports {
#address-cells = <1>;
#size-cells = <0>;

/*
* Both the core tile and the motherboard routes their output
* pads to this transmitter. The motherboard system controller
* can select one of them as input using a mux register in
* "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is
* the only platform with this specific set-up.
*/
port@0 {
reg = <0>;
dvi_bridge_in_ct: endpoint {
remote-endpoint = <&clcd_pads_ct>;
};
};
port@1 {
reg = <1>;
dvi_bridge_in_mb: endpoint {
remote-endpoint = <&clcd_pads_mb>;
};
};
};

bindings:
ports:
$ref: /schemas/graph.yaml#/properties/ports

properties:
port@0:
$ref: /schemas/graph.yaml#/properties/port
description: Parallel RGB input port

port@1:
$ref: /schemas/graph.yaml#/properties/port
description: HDMI output port

port@3:
$ref: /schemas/graph.yaml#/properties/port
description: Sound input port

The patch is conform to the bindings, the DT was working but is actually not valid.

Neil

>
> Neil

\
 
 \ /
  Last update: 2022-08-08 11:52    [W:0.078 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site