lkml.org 
[lkml]   [2022]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] drm/bridge: sii902x: add support for DRM_BRIDGE_ATTACH_NO_CONNECTOR
From
08.08.2022 12:51, Neil Armstrong пишет:
> On 08/08/2022 11:15, Neil Armstrong wrote:
>> Hi Dmitry,
>>
>> On 31/07/2022 22:07, Dmitry Osipenko wrote:
>>> 13.01.2022 17:43, Neil Armstrong пишет:
>>>> This adds support for DRM_BRIDGE_ATTACH_NO_CONNECTOR by adding the
>>>> bridge get_edid() and detect() callbacks after refactoring the
>>>> connector
>>>> get_modes() and connector_detect() callbacks.
>>>>
>>>> In order to keep the bridge working, extra code in get_modes() has been
>>>> moved to more logical places.
>>>>
>>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>>>> ---
>>>>   drivers/gpu/drm/bridge/sii902x.c | 129
>>>> ++++++++++++++++++++++++-------
>>
>> 1 file changed, 99 insertions(+), 30 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/bridge/sii902x.c
>>>> b/drivers/gpu/drm/bridge/sii902x.c
>>>> index 89558e581530..65549fbfdc87 100644
>>>> --- a/drivers/gpu/drm/bridge/sii902x.c
>>>> +++ b/drivers/gpu/drm/bridge/sii902x.c
>
> [...]
>
>>>>       }
>>>> +    endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 1, -1);
>>>> +    if (endpoint) {
>>>> +        struct device_node *remote =
>>>> of_graph_get_remote_port_parent(endpoint);
>>>> +
>>>> +        of_node_put(endpoint);
>>>> +        if (!remote) {
>>>> +            dev_err(dev, "Endpoint in port@1 unconnected\n");
>>>> +            return -ENODEV;
>>>> +        }
>>>> +
>>>> +        if (!of_device_is_available(remote)) {
>>>> +            dev_err(dev, "port@1 remote device is disabled\n");
>>>> +            of_node_put(remote);
>>>> +            return -ENODEV;
>>>> +        }
>>>> +
>>>> +        sii902x->next_bridge = of_drm_find_bridge(remote);
>>>> +        of_node_put(remote);
>>>> +        if (!sii902x->next_bridge)
>>>> +            return -EPROBE_DEFER;
>>>
>>> Hi,
>>>
>>> This patch broke ARM/QEMU vexpress display because of_drm_find_bridge()
>>> always fail with -EPROBE_DEFER. Reverting this patch returns display
>>> back. Please fix or revert, thanks in advance.
>>
>> Can you share a QEMU cmdline to reproduce ?
>
> Actually the vexpress DT has multiple input ports instead of a single
> input port at @0
> and an output port at @1 like documented in the bindings:
>
> vexpress-v2m.dtsi#L303-L307:
> ports {
>     #address-cells = <1>;
>     #size-cells = <0>;
>
>     /*
>      * Both the core tile and the motherboard routes their output
>      * pads to this transmitter. The motherboard system controller
>      * can select one of them as input using a mux register in
>      * "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is
>      * the only platform with this specific set-up.
>      */
>     port@0 {
>         reg = <0>;
>         dvi_bridge_in_ct: endpoint {
>             remote-endpoint = <&clcd_pads_ct>;
>         };
>     };
>     port@1 {
>         reg = <1>;
>         dvi_bridge_in_mb: endpoint {
>             remote-endpoint = <&clcd_pads_mb>;
>         };
>     };
> };
>
> bindings:
>   ports:
>     $ref: /schemas/graph.yaml#/properties/ports
>
>     properties:
>       port@0:
>         $ref: /schemas/graph.yaml#/properties/port
>         description: Parallel RGB input port
>
>       port@1:
>         $ref: /schemas/graph.yaml#/properties/port
>         description: HDMI output port
>
>       port@3:
>         $ref: /schemas/graph.yaml#/properties/port
>         description: Sound input port
>
> The patch is conform to the bindings, the DT was working but is actually
> not valid.

I haven't looked closely at how to fix this properly, but if we can fix
it using of_machine_is_compatible("arm,vexpress") workaround in the
driver, then it will be good enough at least as a temporal fix, IMO.

\
 
 \ /
  Last update: 2022-08-15 02:17    [W:0.100 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site