lkml.org 
[lkml]   [2022]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] arm64: dts: ti: k3-am642-sk: Add DT entry for onboard LEDs
Date
From: Aparna M <a-m1@ti.com>

AM642 SK has 8 leds connected to tpic2810 onboard. Add support for these
gpio leds.

Signed-off-by: Aparna M <a-m1@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
v3:
Fix compile error due to missing header
Fix whitespace issues

v2: https://lore.kernel.org/all/20220629075859.6939-1-a-m1@ti.com/

arch/arm64/boot/dts/ti/k3-am642-sk.dts | 70 ++++++++++++++++++++++++++
1 file changed, 70 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 2620469a7517..cc36b9368356 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -9,6 +9,7 @@
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/leds/common.h>
#include "k3-am642.dtsi"

/ {
@@ -150,6 +151,67 @@ wlan_en: regulator-2 {
vin-supply = <&com8_ls_en>;
gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>;
};
+
+ led-controller {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ gpios = <&exp2 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-1 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <2>;
+ gpios = <&exp2 1 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <3>;
+ gpios = <&exp2 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-3 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <4>;
+ gpios = <&exp2 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-4 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <5>;
+ gpios = <&exp2 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-5 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <6>;
+ gpios = <&exp2 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-6 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <7>;
+ gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-7 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_HEARTBEAT;
+ function-enumerator = <8>;
+ linux,default-trigger = "heartbeat";
+ gpios = <&exp2 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
};

&main_pmx0 {
@@ -330,6 +392,14 @@ exp1: gpio@70 {
"VPP_LDO_EN", "RPI_PS_3V3_En",
"RPI_PS_5V0_En", "RPI_HAT_DETECT";
};
+
+ exp2: gpio@60 {
+ compatible = "ti,tpic2810";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8";
+ };
};

&main_i2c3 {
--
2.37.2
\
 
 \ /
  Last update: 2022-08-30 14:34    [W:1.878 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site