lkml.org 
[lkml]   [2022]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 07/11] dt-bindings: PCI: qcom-ep: Make PERST separation optional
Date
PERST separation is an optional debug feature used to collect the crash
dump from the PCIe endpoint devices by the PCIe host when the endpoint
crashes. This feature keeps the PCIe link up by separating the PCIe IP
block from the SoC reset logic.

So remove the corresponding property "qcom,perst-regs" from the required
properties list.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml | 1 -
1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
index 3d23599e5e91..b728ede3f09f 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
@@ -105,7 +105,6 @@ required:
- reg-names
- clocks
- clock-names
- - qcom,perst-regs
- interrupts
- interrupt-names
- reset-gpios
--
2.25.1
\
 
 \ /
  Last update: 2022-08-26 20:21    [W:1.643 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site