lkml.org 
[lkml]   [2022]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v1] ARM: dts: aspeed: Update for Facebook Yosemite V2 BMC
This patch includes the following updates for Yosemite V2
BMC.

1) Updated GPIO configuration for power control.
2) Added IPMB-13 channel for Debug Card communication.
3) Removed EEPROM driver IPMB-12 channel and keeping it as
"status ok".

Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
---
.../dts/aspeed-bmc-facebook-yosemitev2.dts | 49 +++++++++++++++++--
1 file changed, 44 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
index 8864e9c312a8..4d2ff7eb6740 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
@@ -119,6 +119,40 @@
&pinctrl_adc15_default>;
};

+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "","","","","","","","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "POWER_BUTTON","POWER_OUT1","","POWER_OUT2","","POWER_OUT3","","POWER_OUT4",
+ /*E0-E7*/ "DEBUG_UART_SEL0","DEBUG_UART_SEL1","DEBUG_UART_SEL2","DEBUG_UART_RX_SEL_N","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2","LED_POST_CODE_3","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "SLOT1_POWER_OK","SLOT2_POWER_OK","SLOT3_POWER_OK","SLOT4_POWER_OK","","","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","I2C_SLOT1","I2C_SLOT2","I2C_SLOT3","I2C_SLOT4","","",
+ /*O0-O7*/ "","","","SELECTOR_BUTTON","SLOT1_POWER","SLOT2_POWER","SLOT3_POWER","SLOT4_POWER",
+ /*P0-P7*/ "","","","","LED_POST_CODE_4","LED_POST_CODE_5","LED_POST_CODE_6","LED_POST_CODE_7",
+ /*Q0-Q7*/ "","","","","","","","",
+ /*R0-R7*/ "","","","GPIO_DBG_CARD_PRSNT","","","","",
+ /*S0-S7*/ "RESET_OUT1","RESET_OUT2","RESET_OUT3","RESET_OUT4","","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "POST_COMPLETE","POST_COMPLETE2","POST_COMPLETE3","POST_COMPLETE4","","","","",
+ /*AA0-AA7*/ "","","","","HAND_SW1","HAND_SW2","HAND_SW3","HAND_SW4",
+ /*AB0-AB7*/ "RESET_BUTTON","","","","","","","",
+ /*AC0-AC7*/ "","","","","","","","";
+};
+
&i2c1 {
//Host1 IPMB bus
status = "okay";
@@ -207,11 +241,16 @@

&i2c12 {
status = "okay";
- //MEZZ_FRU
- eeprom@51 {
- compatible = "atmel,24c64";
- reg = <0x51>;
- pagesize = <32>;
+};
+
+&i2c13 {
+ status = "okay";
+ // Debug Card
+ multi-master;
+ ipmb13@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
};
};

--
2.17.1
\
 
 \ /
  Last update: 2022-08-22 09:04    [W:0.499 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site