lkml.org 
[lkml]   [2022]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFT PATCH v3 04/16] arm64: dts: qcom: msm8998: split TCSR halt regs out of mutex
Date
The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 02d21bff2198..f0806ed103f1 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1049,7 +1049,12 @@ ufsphy_lanes: phy@1da7400 {

tcsr_mutex_regs: syscon@1f40000 {
compatible = "syscon";
- reg = <0x01f40000 0x40000>;
+ reg = <0x01f40000 0x20000>;
+ };
+
+ tcsr_regs_1: sycon@1f60000 {
+ compatible = "qcom,msm8998-tcsr", "syscon";
+ reg = <0x01f60000 0x20000>;
};

tlmm: pinctrl@3400000 {
@@ -1340,7 +1345,7 @@ remoteproc_mss: remoteproc@4080000 {
resets = <&gcc GCC_MSS_RESTART>;
reset-names = "mss_restart";

- qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+ qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;

power-domains = <&rpmpd MSM8998_VDDCX>,
<&rpmpd MSM8998_VDDMX>;
--
2.34.1
\
 
 \ /
  Last update: 2022-08-19 10:32    [W:0.288 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site