lkml.org 
[lkml]   [2022]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFT PATCH v3 13/16] arm64: dts: qcom: sdm630: split TCSR halt regs out of mutex
Date
The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v2:
1. New patch
---
arch/arm64/boot/dts/qcom/sdm630.dtsi | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 1bc9091cad2a..a4f73be3d60a 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -699,7 +699,12 @@ tsens: thermal-sensor@10ae000 {

tcsr_mutex_regs: syscon@1f40000 {
compatible = "syscon";
- reg = <0x01f40000 0x40000>;
+ reg = <0x01f40000 0x20000>;
+ };
+
+ tcsr_regs_1: sycon@1f60000 {
+ compatible = "qcom,sdm630-tcsr", "syscon";
+ reg = <0x01f60000 0x20000>;
};

tlmm: pinctrl@3100000 {
--
2.34.1
\
 
 \ /
  Last update: 2022-08-19 10:33    [W:0.161 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site