lkml.org 
[lkml]   [2022]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] platform/x86: thinkpad_acpi: Explicitly set to balanced mode on startup
Date
It was observed that on a Thinkpad T14 Gen1 (AMD) that the platform
profile is starting up in 'low-power' mode after refreshing what the
firmware had. This is most likely a firmware bug, but as a harmless
workaround set the default profile to 'balanced' at thinkpad_acpi startup.

Reported-by: madcatx@atlas.cz
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216347
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
v1->v2
* Only run on AMD systems (PSC mode)

drivers/platform/x86/thinkpad_acpi.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 22d4e8633e30..2dbb9fc011a7 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -10592,10 +10592,9 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
/* Ensure initial values are correct */
dytc_profile_refresh();

- /* Set AMT correctly now we know current profile */
- if ((dytc_capabilities & BIT(DYTC_FC_PSC)) &&
- (dytc_capabilities & BIT(DYTC_FC_AMT)))
- dytc_control_amt(dytc_current_profile == PLATFORM_PROFILE_BALANCED);
+ /* Workaround for https://bugzilla.kernel.org/show_bug.cgi?id=216347 */
+ if (dytc_capabilities & BIT(DYTC_FC_PSC))
+ dytc_profile_set(NULL, PLATFORM_PROFILE_BALANCED);

return 0;
}
--
2.34.1
\
 
 \ /
  Last update: 2022-08-19 20:12    [W:0.043 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site