lkml.org 
[lkml]   [2022]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 00/13] OPP: Add support for multiple clocks*
On 07-07-22, 22:43, Dmitry Osipenko wrote:
> This patch breaks Tegra again, please take a look:

Damn, not again :(

> OPP: Remove dev{m}_pm_opp_of_add_table_noclk()

Why did you mention this patch ? This just removed an unused API,
Tegra should have broke because of something else, isn't it ?

> 8<--- cut here ---
> Unable to handle kernel paging request at virtual address ffffffff
> [ffffffff] *pgd=9effd861, *pte=00000000, *ppte=00000000
> Internal error: Oops: 37 [#1] PREEMPT SMP ARM
> Modules linked in:
> CPU: 3 PID: 8 Comm: kworker/u8:0 Not tainted
> 5.19.0-rc1-00040-g30b62d123f4f #82
> Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
> Workqueue: events_unbound deferred_probe_work_func
> PC is at _opp_compare_key+0x40/0xc4
> LR is at 0xfffffffb

How is LR set to such an address ?

> pc : [<c0b91b54>] lr : [<fffffffb>] psr: 20000113
> sp : df831b08 ip : c33cd4d0 fp : df831b24
> r10: c2586078 r9 : c258606c r8 : 00000000
> r7 : 00000000 r6 : 00000001 r5 : c33cd480 r4 : c2586000
> r3 : 00000000 r2 : c33cd480 r1 : c258606c r0 : c2586000
> Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
> Control: 10c5387d Table: 8000404a DAC: 00000051
> ...
> Backtrace:
> _opp_compare_key from _set_opp+0x80/0x408

Whatever happened, happened from _opp_compare_key() and I tried to
look at it many times, couldn't figure out what's wrong there.

For the device in question, pmc I think, we don't have any "opp-hz"
property in the DT, but still the OPP core will fetch its clock and
set clk_count to 1. But this was working earlier too, we were
comparing the rate anyways. I think one of _opp_compare_rate() or
_opp_compare_bw() is broken here, but I just couldn't figure out. The
rate one should run one loop and bw one should just return. I don't
see why a crash should come out eventually.

Can you help debug this a bit ? Also see what are the values of
opp_table->path_count and opp_table->clk_count, should be 0 and 1
AFAICT.

Sorry about this Dmitry, I think we are all settled and again went
into crap.

--
viresh

\
 
 \ /
  Last update: 2022-07-08 09:20    [W:0.213 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site