lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/3] remoteproc: pru: Add support for various PRU cores on K3 AM62x SoCs
On Thu, Jun 02, 2022 at 03:49:20PM +0530, Kishon Vijay Abraham I wrote:
> The K3 AM62x family of SoC has one PRUSS-M instance and it has two
> Programmable Real-Time Units (PRU0 and PRU1). This does not support
> Industrial Communications Subsystem features like Ethernet.
>
> Enhance the existing PRU remoteproc driver to support the PRU cores
> by using specific compatibles. The initial names for the firmware
> images for each PRU core are retrieved from DT nodes, and can be adjusted
> through sysfs if required.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> drivers/remoteproc/pru_rproc.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
> index 1777a01fa84e..128bf9912f2c 100644
> --- a/drivers/remoteproc/pru_rproc.c
> +++ b/drivers/remoteproc/pru_rproc.c
> @@ -897,6 +897,7 @@ static const struct of_device_id pru_rproc_match[] = {
> { .compatible = "ti,j721e-pru", .data = &k3_pru_data },
> { .compatible = "ti,j721e-rtu", .data = &k3_rtu_data },
> { .compatible = "ti,j721e-tx-pru", .data = &k3_tx_pru_data },
> + { .compatible = "ti,am625-pru", .data = &k3_pru_data },

I have applied this set.

Thanks,
Mathieu

> {},
> };
> MODULE_DEVICE_TABLE(of, pru_rproc_match);
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2022-07-05 18:45    [W:0.114 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site