lkml.org 
[lkml]   [2022]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 3/3] remoteproc: pru: Add support for various PRU cores on K3 AM62x SoCs
    Date
    The K3 AM62x family of SoC has one PRUSS-M instance and it has two
    Programmable Real-Time Units (PRU0 and PRU1). This does not support
    Industrial Communications Subsystem features like Ethernet.

    Enhance the existing PRU remoteproc driver to support the PRU cores
    by using specific compatibles. The initial names for the firmware
    images for each PRU core are retrieved from DT nodes, and can be adjusted
    through sysfs if required.

    Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
    ---
    drivers/remoteproc/pru_rproc.c | 1 +
    1 file changed, 1 insertion(+)

    diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
    index 1777a01fa84e..128bf9912f2c 100644
    --- a/drivers/remoteproc/pru_rproc.c
    +++ b/drivers/remoteproc/pru_rproc.c
    @@ -897,6 +897,7 @@ static const struct of_device_id pru_rproc_match[] = {
    { .compatible = "ti,j721e-pru", .data = &k3_pru_data },
    { .compatible = "ti,j721e-rtu", .data = &k3_rtu_data },
    { .compatible = "ti,j721e-tx-pru", .data = &k3_tx_pru_data },
    + { .compatible = "ti,am625-pru", .data = &k3_pru_data },
    {},
    };
    MODULE_DEVICE_TABLE(of, pru_rproc_match);
    --
    2.17.1
    \
     
     \ /
      Last update: 2022-06-02 12:21    [W:3.569 / U:0.104 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site