lkml.org 
[lkml]   [2022]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patches in this message
/
From
Subject[PATCH v2] timers: Optimize usleep_range()
Date
Most of the time the 'min' and 'max' parameters of usleep_range() are
constant. We can take advantage of it to pre-compute at compile time
some values otherwise computer at run-time in usleep_range_state().

Replace usleep_range_state() by a new __nsleep_range_delta_state() function
that takes as parameters the pre-computed values.

The main benefit is to save a few instructions, especially 2
multiplications (x1000 when converting us to ns).


Some hand simplified diff of the generated asm are given below. They were
produced on a Intel(R) Core(TM) i7-3770, with gcc 11.2.0.

drivers/clk/clk-si514.c (taken as an example)
-----------------------
In this driver we have:
usleep_range(10000, 12000);

--- clk_before.asm 2022-07-29 21:49:05.702289425 +0200
+++ clk_after.asm 2022-07-29 21:50:23.801548963 +0200
@@ -972,8 +972,8 @@
ea0: 45 85 e4 test %r12d,%r12d
ea3: 0f 88 f6 fc ff ff js b9f <si514_set_rate+0x9f>
ea9: e8 00 00 00 00 call eae <si514_set_rate+0x3ae>
- eae: be e0 2e 00 00 mov $0x2ee0,%esi ; 12.000
- eb3: bf 10 27 00 00 mov $0x2710,%edi ; 10.000
+ eae: be 80 84 1e 00 mov $0x1e8480,%esi ; 2.000.000
+ eb3: bf 80 96 98 00 mov $0x989680,%edi ; 10.000.000
eb8: ba 02 00 00 00 mov $0x2,%edx
ebd: e8 00 00 00 00 call ec2 <si514_set_rate+0x3c2>
ec2: 44 8b 74 24 30 mov 0x30(%rsp),%r14d
The asm produced in the caller is mostly the same. Only constant values
passed to usleep_range_state() or __nsleep_range_delta_state() are
different. No other instructions or whatever is different.

kernel/time/timer.c
-------------------
-0000000000000000 <usleep_range_state>:
+0000000000000000 <__nsleep_range_delta_state>:
f3 0f 1e fa endbr64
e8 00 00 00 00 call ...
48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax
@@ -10692,16 +10692,14 @@
41 56 push %r14
49 c7 c6 00 00 00 00 mov $0x0,%r14
41 55 push %r13
- 41 89 d5 mov %edx,%r13d
+ 49 89 f5 mov %rsi,%r13
41 54 push %r12
- 49 89 f4 mov %rsi,%r12
+ 41 89 d4 mov %edx,%r12d
55 push %rbp
- 44 89 ed mov %r13d,%ebp
+ 44 89 e5 mov %r12d,%ebp
53 push %rbx
48 89 fb mov %rdi,%rbx
81 e5 cc 00 00 00 and $0xcc,%ebp
- 49 29 dc sub %rbx,%r12 ; (max - min)
- 4d 69 e4 e8 03 00 00 imul $0x3e8,%r12,%r12 ; us --> ns (x 1000)
48 83 ec 68 sub $0x68,%rsp
48 c7 44 24 08 b3 8a movq $0x41b58ab3,0x8(%rsp)
b5 41
@@ -10721,18 +10719,16 @@
31 c0 xor %eax,%eax
e8 00 00 00 00 call ...
e8 00 00 00 00 call ...
- 49 89 c0 mov %rax,%r8
- 48 69 c3 e8 03 00 00 imul $0x3e8,%rbx,%rax ; us --> ns (x 1000)
+ 48 01 d8 add %rbx,%rax
+ 48 89 44 24 28 mov %rax,0x28(%rsp)
65 48 8b 1c 25 00 00 mov %gs:0x0,%rbx
00 00
- 4c 01 c0 add %r8,%rax
- 48 89 44 24 28 mov %rax,0x28(%rsp)
e8 00 00 00 00 call ...
31 ff xor %edi,%edi
89 ee mov %ebp,%esi

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
v1 -> v2
- Simplify and avoid use of __buildint_constant_p() [John Stultz <jstultz@google.com>]
- Also update usleep_idle_range()
- Axe usleep_range_state() [John Stultz <jstultz@google.com>]
- Fix kerneldoc [John Stultz <jstultz@google.com>]
- Update log message accordingly
https://lore.kernel.org/all/d7fc85736adee02ce52ee88a54fa7477fbd18ed2.1653236802.git.christophe.jaillet@wanadoo.fr/
---
include/linux/delay.h | 17 +++++++++++++----
kernel/time/timer.c | 17 ++++++++---------
2 files changed, 21 insertions(+), 13 deletions(-)
diff --git a/include/linux/delay.h b/include/linux/delay.h
index 039e7e0c7378..27938a49c701 100644
--- a/include/linux/delay.h
+++ b/include/linux/delay.h
@@ -59,17 +59,26 @@ void calibrate_delay(void);
void __attribute__((weak)) calibration_delay_done(void);
void msleep(unsigned int msecs);
unsigned long msleep_interruptible(unsigned int msecs);
-void usleep_range_state(unsigned long min, unsigned long max,
- unsigned int state);
+void __nsleep_range_delta_state(u64 min, u64 delta, unsigned int state);

static inline void usleep_range(unsigned long min, unsigned long max)
{
- usleep_range_state(min, max, TASK_UNINTERRUPTIBLE);
+ /*
+ * Most of the time min and max are constant, so the time delta and the
+ * convertion to ns will be optimized-out at compile time.
+ */
+ u64 delta = (u64)(max - min) * NSEC_PER_USEC;
+
+ __nsleep_range_delta_state(min * NSEC_PER_USEC, delta,
+ TASK_UNINTERRUPTIBLE);
}

static inline void usleep_idle_range(unsigned long min, unsigned long max)
{
- usleep_range_state(min, max, TASK_IDLE);
+ u64 delta = (u64)(max - min) * NSEC_PER_USEC;
+
+ __nsleep_range_delta_state(min * NSEC_PER_USEC, delta,
+ TASK_IDLE);
}

static inline void ssleep(unsigned int seconds)
diff --git a/kernel/time/timer.c b/kernel/time/timer.c
index 717fcb9fb14a..475b1c0406d7 100644
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -2109,22 +2109,21 @@ unsigned long msleep_interruptible(unsigned int msecs)
EXPORT_SYMBOL(msleep_interruptible);

/**
- * usleep_range_state - Sleep for an approximate time in a given state
- * @min: Minimum time in usecs to sleep
- * @max: Maximum time in usecs to sleep
+ * __nsleep_range_delta_state - Sleep for an approximate time in a given state
+ * @min: Minimum time in nsecs to sleep
+ * @delta: Duration in nsecs that can be tolerated after @min
* @state: State of the current task that will be while sleeping
*
* In non-atomic context where the exact wakeup time is flexible, use
- * usleep_range_state() instead of udelay(). The sleep improves responsiveness
+ * usleep_[idle_]range() instead of udelay(). The sleep improves responsiveness
* by avoiding the CPU-hogging busy-wait of udelay(), and the range reduces
* power usage by allowing hrtimers to take advantage of an already-
* scheduled interrupt instead of scheduling a new one just for this sleep.
*/
-void __sched usleep_range_state(unsigned long min, unsigned long max,
- unsigned int state)
+void __sched __nsleep_range_delta_state(u64 min, u64 delta,
+ unsigned int state)
{
- ktime_t exp = ktime_add_us(ktime_get(), min);
- u64 delta = (u64)(max - min) * NSEC_PER_USEC;
+ ktime_t exp = ktime_add_ns(ktime_get(), min);

for (;;) {
__set_current_state(state);
@@ -2133,4 +2132,4 @@ void __sched usleep_range_state(unsigned long min, unsigned long max,
break;
}
}
-EXPORT_SYMBOL(usleep_range_state);
+EXPORT_SYMBOL(__nsleep_range_delta_state);
--
2.34.1
\
 
 \ /
  Last update: 2022-07-29 22:30    [W:0.078 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site