lkml.org 
[lkml]   [2022]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8 5/6] arm64: dts: mt8195: Add efuse node to mt8195
Date
This adds the efuse node. This will be required by the thermal driver
to get the calibration data.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 0ff34edcf8c8..4fbf24b5d202 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -1236,6 +1236,22 @@ nor_flash: spi@1132c000 {
status = "disabled";
};

+ efuse: efuse@11c10000 {
+ compatible = "mediatek,efuse";
+ reg = <0 0x11c10000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ lvts_efuse_data1: lvts1-calib@1bc {
+ reg = <0x1bc 0x14>;
+ };
+ lvts_efuse_data2: lvts2-calib@1d0 {
+ reg = <0x1d0 0x38>;
+ };
+ svs_calibration: calib@580 {
+ reg = <0x580 0x64>;
+ };
+ };
+
u3phy2: t-phy@11c40000 {
compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
#address-cells = <1>;
--
2.34.1
\
 
 \ /
  Last update: 2022-07-26 15:56    [W:0.172 / U:0.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site