lkml.org 
[lkml]   [2022]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] staging: r8188eu: convert rtw_pwr_wakeup to correct error code semantics
Date
Convert the rtw_pwr_wakeup function to use 0 on success and an appropriate
error code on error. For the first failure block where ips_leave is
invoked, use -ENOMEM as this is the main cause of failure here anyway.
For the second failure block, use -EBUSY, as it seems the most
appropriate.

Finally, within the functions rtw_wx_set_mode, rtw_wx_set_wap,
rtw_wx_set_scan and rtw_wx_set_essid, pass the error code on from
rtw_pwr_wakeup as appropriate now that it is converted.

This gets the driver closer to removal of the non-standard _SUCCESS and
_FAIL definitions, which are inverted compared to the standard in-kernel
error code mechanism.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
---

Changes from V1: Act on feedback from Dan Carpenter:
* Try to use more appropriate error codes than -EPERM.
* Revert the places where existing -1 was converted as they are out of
scope.
* Preserve error codes in places where calling function already uses
proper negative semantics, so that they can be passed through to the
caller.

---
drivers/staging/r8188eu/core/rtw_p2p.c | 4 ++--
drivers/staging/r8188eu/core/rtw_pwrctrl.c | 10 ++++----
drivers/staging/r8188eu/os_dep/ioctl_linux.c | 24 +++++++-------------
3 files changed, 15 insertions(+), 23 deletions(-)

diff --git a/drivers/staging/r8188eu/core/rtw_p2p.c b/drivers/staging/r8188eu/core/rtw_p2p.c
index c306aafa183b..bd654d4ff8b4 100644
--- a/drivers/staging/r8188eu/core/rtw_p2p.c
+++ b/drivers/staging/r8188eu/core/rtw_p2p.c
@@ -1888,7 +1888,7 @@ int rtw_p2p_enable(struct adapter *padapter, enum P2P_ROLE role)

if (role == P2P_ROLE_DEVICE || role == P2P_ROLE_CLIENT || role == P2P_ROLE_GO) {
/* leave IPS/Autosuspend */
- if (rtw_pwr_wakeup(padapter) == _FAIL) {
+ if (rtw_pwr_wakeup(padapter)) {
ret = _FAIL;
goto exit;
}
@@ -1902,7 +1902,7 @@ int rtw_p2p_enable(struct adapter *padapter, enum P2P_ROLE role)
init_wifidirect_info(padapter, role);

} else if (role == P2P_ROLE_DISABLE) {
- if (rtw_pwr_wakeup(padapter) == _FAIL) {
+ if (rtw_pwr_wakeup(padapter)) {
ret = _FAIL;
goto exit;
}
diff --git a/drivers/staging/r8188eu/core/rtw_pwrctrl.c b/drivers/staging/r8188eu/core/rtw_pwrctrl.c
index cf9020a73933..8b1c50668dfe 100644
--- a/drivers/staging/r8188eu/core/rtw_pwrctrl.c
+++ b/drivers/staging/r8188eu/core/rtw_pwrctrl.c
@@ -381,24 +381,24 @@ int rtw_pwr_wakeup(struct adapter *padapter)
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
unsigned long timeout = jiffies + msecs_to_jiffies(3000);
unsigned long deny_time;
- int ret = _SUCCESS;
+ int ret = 0;

while (pwrpriv->ps_processing && time_before(jiffies, timeout))
msleep(10);

/* I think this should be check in IPS, LPS, autosuspend functions... */
if (check_fwstate(pmlmepriv, _FW_LINKED)) {
- ret = _SUCCESS;
+ ret = 0;
goto exit;
}

if (pwrpriv->rf_pwrstate == rf_off && ips_leave(padapter) == _FAIL) {
- ret = _FAIL;
+ ret = -ENOMEM;
goto exit;
}

if (padapter->bDriverStopped || !padapter->bup || !padapter->hw_init_completed) {
- ret = _FAIL;
+ ret = -EBUSY;
goto exit;
}

@@ -439,7 +439,7 @@ int rtw_pm_set_ips(struct adapter *padapter, u8 mode)
return 0;
} else if (mode == IPS_NONE) {
rtw_ips_mode_req(pwrctrlpriv, mode);
- if ((padapter->bSurpriseRemoved == 0) && (rtw_pwr_wakeup(padapter) == _FAIL))
+ if ((padapter->bSurpriseRemoved == 0) && rtw_pwr_wakeup(padapter))
return -EFAULT;
} else {
return -EINVAL;
diff --git a/drivers/staging/r8188eu/os_dep/ioctl_linux.c b/drivers/staging/r8188eu/os_dep/ioctl_linux.c
index 930bb4aea435..7f91dac2e41b 100644
--- a/drivers/staging/r8188eu/os_dep/ioctl_linux.c
+++ b/drivers/staging/r8188eu/os_dep/ioctl_linux.c
@@ -687,12 +687,9 @@ static int rtw_wx_set_mode(struct net_device *dev, struct iw_request_info *a,
enum ndis_802_11_network_infra networkType;
int ret = 0;

-
-
- if (_FAIL == rtw_pwr_wakeup(padapter)) {
- ret = -EPERM;
+ ret = rtw_pwr_wakeup(padapter);
+ if (ret)
goto exit;
- }

if (!padapter->hw_init_completed) {
ret = -EPERM;
@@ -931,12 +928,9 @@ static int rtw_wx_set_wap(struct net_device *dev,
struct wlan_network *pnetwork = NULL;
enum ndis_802_11_auth_mode authmode;

-
-
- if (_FAIL == rtw_pwr_wakeup(padapter)) {
- ret = -1;
+ ret = rtw_pwr_wakeup(padapter);
+ if (ret)
goto exit;
- }

if (!padapter->bup) {
ret = -1;
@@ -1049,10 +1043,9 @@ static int rtw_wx_set_scan(struct net_device *dev, struct iw_request_info *a,
struct ndis_802_11_ssid ssid[RTW_SSID_SCAN_AMOUNT];
struct wifidirect_info *pwdinfo = &padapter->wdinfo;

- if (_FAIL == rtw_pwr_wakeup(padapter)) {
- ret = -1;
+ ret = rtw_pwr_wakeup(padapter);
+ if (ret)
goto exit;
- }

if (padapter->bDriverStopped) {
ret = -1;
@@ -1252,10 +1245,9 @@ static int rtw_wx_set_essid(struct net_device *dev,

uint ret = 0, len;

- if (_FAIL == rtw_pwr_wakeup(padapter)) {
- ret = -1;
+ ret = rtw_pwr_wakeup(padapter);
+ if (ret)
goto exit;
- }

if (!padapter->bup) {
ret = -1;
--
2.36.1
\
 
 \ /
  Last update: 2022-07-26 00:08    [W:0.167 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site