lkml.org 
[lkml]   [2022]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 0/7] PCI: brcmstb: Re-submit reverted patchset
Date
v3 -- Replaced "refusal mode" commit with one that gates config
space accesses based on link status (Bjorn)
-- Restrict the brcm_pcie_start_link() code to only those things
related to link-up and put the rest in brcm_pcie_setup()
-- Added commit to change map functions to end with 'map_bus' (Bjorn)
-- s/0x060400/PCI_CLASS_BRIDGE_PCI_NORMAL/ (Pali)
-- Limit config space accesess to 4k window.
-- Remove wording in a commit message that said the regulators
could be endpoint power supplies

V2 -- As v1 included the minimal code to fix a regression. v2 does
the same but adds some improvements suggested by Bjorn.
-- In the unlikely but possible case that some other driver
starts using the port driver's dev_data field, do not overwrite
it but issue an error and return.
-- Functions probe() and resume() do similar operations but
did them in a different order; make this order consistent
for both.
-- New commit to remove forward declarations.
-- New commit for only the PCIe config-space access "refusal mode".
-- brcm_pcie_linkup renamed to brcm_pcie_start_link
-- Add '_noirq' to the brcm_pcie_{suspend,resume} function names
to match the dev_pm_ops names.
-- Changes to commit messages:
o Explain why we are splitting a function in two parts.
o s/RB/Root Port/

NOTE for Bjorn: The two commits "add mechanism .." and "add control ..."
would probably be more clear if they were squashed. They are kept
separate as the first one's code may someday be moved under the Port
driver. As such, there's some churn.

NOTE for Bjorn: There is no hurry on Broadcom's side wrt which
release cycle/phase this patchset is applied. It goes in
when you think it is ready.

V1 -- Resubmission of patchset after original was reverted for a
regression.

A submission [1] was made to enable a PCIe root port to turn on
regulators for downstream devices. It was accepted. Months later, a
regression was discovered on an RPi CM4 [2]. The patchset was reverted
[3] as the fix came too late in the release cycle. The regression in
question is triggered only when the PCIe RC DT node has no root port
subnode, which is a perfectly reasonsable configuration.

The original commits are now being resubmitted with some modifications
to fix the regression. The modifcations on the original commits are
described below (the SHA is that of the original commit):

[830aa6f29f07 PCI: brcmstb: Split brcm_pcie_setup() into two funcs]
NOTE: In the originally submitted patchset, this commit introduced a
regression that was corrected by a subsequent commit in the same
patchset. Let's not do this again.

@@ -1411,6 +1411,10 @@ static int brcm_pcie_probe(struct platform_device *pdev)
if (ret)
goto fail;

+ ret = brcm_pcie_linkup(pcie);
+ if (ret)
+ goto fail;

[67211aadcb4b PCI: brcmstb: Add mechanism to turn on subdev regulators]
NOTE: Not related to the regression, the regulators must be freed whenever
the PCIe tree is dismantled:

@@ -507,6 +507,7 @@ static void pci_subdev_regulators_remove_bus(struct pci_bus *bus)

if (regulator_bulk_disable(sr->num_supplies, sr->supplies))
dev_err(dev, "failed to disable regulators for downstream device\n");
+ regulator_bulk_free(sr->num_supplies, sr->supplies);
dev->driver_data = NULL;

[93e41f3fca3d PCI: brcmstb: Add control of subdevice voltage regulators]
NOTE: If the PCIe RC DT node was missing a Root Port subnode, the PCIe
link-up was skipped. This is the regression. Fix it by attempting
link-up even if the Root Port DT subnode is missing.

@@ -503,11 +503,10 @@ static int pci_subdev_regulators_add_bus(struct pci_bus *bus)

static int brcm_pcie_add_bus(struct pci_bus *bus)
{
- struct device *dev = &bus->dev;
struct brcm_pcie *pcie = (struct brcm_pcie *) bus->sysdata;
int ret;
- if (!dev->of_node || !bus->parent || !pci_is_root_bus(bus->parent))
+ if (!bus->parent || !pci_is_root_bus(bus->parent))
return 0;
ret = pci_subdev_regulators_add_bus(bus);

[1] https://lore.kernel.org/r/20220106160332.2143-1-jim2101024@gmail.com
[2] https://bugzilla.kernel.org/show_bug.cgi?id=215925
[3] https://lore.kernel.org/linux-pci/20220511201856.808690-1-helgaas@kernel.org/


Jim Quinlan (7):
PCI: brcmstb: Remove unnecessary forward declarations
PCI: brcmstb: Split brcm_pcie_setup() into two funcs
PCI: brcmstb: Gate config space access on link status
PCI: brcmstb: Add mechanism to turn on subdev regulators
PCI: brcmstb: Add control of subdevice voltage regulators
PCI: brcmstb: Do not turn off WOL regulators on suspend
PCI: brcmstb: Have .map_bus function names end with 'map_bus'

drivers/pci/controller/pcie-brcmstb.c | 476 ++++++++++++++++++--------
1 file changed, 341 insertions(+), 135 deletions(-)

base-commit: e0dccc3b76fb35bb257b4118367a883073d7390e
--
2.17.1

\
 
 \ /
  Last update: 2022-07-25 17:17    [W:1.381 / U:0.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site