Messages in this thread | | | From | Michael Riesch <> | Subject | [PATCH 0/3] Add support for the RK356x variant of the Inno CSI DPHY | Date | Wed, 20 Jul 2022 11:15:24 +0200 |
| |
Hi all,
This series adds support for the variant of the Innosilicon MIPI CSI DPHY that can be found in Rockchip RK356x SoCs.
Please note that only the basic operating mode is supported, in which all four CSI lanes are controlled by the Rockchip ISP. Split lane operation (e.g., two lanes to ISP and two lanes to VICAP) is not supported.
This has been tested on a Radxa ROCK3 Model A board together with an IMX219 camera sensor and a patched version of the rkisp1 driver (with support for the RK356x variant V2.1 added in a very crude way).
Looking forward to your comments!
Best regards, Michael
Michael Riesch (3): dt-bindings: phy: add compatible for rk356x to rockchip-inno-csi-dphy phy: rockchip: add support for the rk356x variant to rockchip-inno-csidphy arm64: dts: rockchip: add csi dphy node to rk356x
.../bindings/phy/rockchip-inno-csi-dphy.yaml | 1 + arch/arm64/boot/dts/rockchip/rk356x.dtsi | 12 ++++++++++ .../phy/rockchip/phy-rockchip-inno-csidphy.c | 24 +++++++++++++++++++ 3 files changed, 37 insertions(+)
-- 2.30.2
| |