lkml.org 
[lkml]   [2022]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Bluetooth: btmtksdio: Add in-band wakeup support
Date
From: Sean Wang <sean.wang@mediatek.com>

'ce64b3e94919 ("Bluetooth: mt7921s: Support wake on bluetooth")'
have added the waken-on-bluetooth via dedicated GPIO.

The patch extends the function to the waken-on-bluetooth via SDIO DAT1 pin
(inband wakeup) when the SDIO host driver is able to support.

Co-developed-by: Yake Yang <yake.yang@mediatek.com>
Signed-off-by: Yake Yang <yake.yang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
drivers/bluetooth/btmtksdio.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index d6700efcfe8c..9ed3af4ba51a 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -118,6 +118,7 @@ MODULE_DEVICE_TABLE(sdio, btmtksdio_table);
#define BTMTKSDIO_FUNC_ENABLED 3
#define BTMTKSDIO_PATCH_ENABLED 4
#define BTMTKSDIO_HW_RESET_ACTIVE 5
+#define BTMTKSDIO_INBAND_WAKEUP 6

struct mtkbtsdio_hdr {
__le16 len;
@@ -1294,6 +1295,9 @@ static bool btmtksdio_sdio_wakeup(struct hci_dev *hdev)
.wakeup_delay = cpu_to_le16(0x20),
};

+ if (test_bit(BTMTKSDIO_INBAND_WAKEUP, &bdev->tx_state))
+ return may_wakeup;
+
if (may_wakeup && bdev->data->chipid == 0x7921) {
struct sk_buff *skb;

@@ -1384,6 +1388,10 @@ static int btmtksdio_probe(struct sdio_func *func,
*/
pm_runtime_put_noidle(bdev->dev);

+ /* Mark if the mmc host can support waken by SDIO */
+ if (device_can_wakeup(func->card->host->parent))
+ set_bit(BTMTKSDIO_INBAND_WAKEUP, &bdev->tx_state);
+
err = device_init_wakeup(bdev->dev, true);
if (err)
bt_dev_err(hdev, "failed to initialize device wakeup");
--
2.25.1
\
 
 \ /
  Last update: 2022-06-10 02:19    [W:0.037 / U:4.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site