lkml.org 
[lkml]   [2022]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] serial: 8250: kill __do_stop_tx()
Date
There seems to be little reason for __do_stop_tx() to exits on its own.
It is rather simple and is only called from __stop_tx(). Thus, move its
logic into __stop_tx().

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/tty/serial/8250/8250_port.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 78b6dedc43e6..448cfbb05f63 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1503,12 +1503,6 @@ static void __stop_tx_rs485(struct uart_8250_port *p, u64 stop_delay)
}
}

-static inline void __do_stop_tx(struct uart_8250_port *p)
-{
- if (serial8250_clear_THRI(p))
- serial8250_rpm_put_tx(p);
-}
-
static inline void __stop_tx(struct uart_8250_port *p)
{
struct uart_8250_em485 *em485 = p->em485;
@@ -1542,7 +1536,9 @@ static inline void __stop_tx(struct uart_8250_port *p)

__stop_tx_rs485(p, stop_delay);
}
- __do_stop_tx(p);
+
+ if (serial8250_clear_THRI(p))
+ serial8250_rpm_put_tx(p);
}

static void serial8250_stop_tx(struct uart_port *port)
--
2.30.2
\
 
 \ /
  Last update: 2022-06-07 10:43    [W:0.119 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site