lkml.org 
[lkml]   [2022]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v9 14/21] KVM: s390: mechanism to enable guest zPCI Interpretation
Date
The guest must have access to certain facilities in order to allow
interpretive execution of zPCI instructions and adapter event
notifications. However, there are some cases where a guest might
disable interpretation -- provide a mechanism via which we can defer
enabling the associated zPCI interpretation facilities until the guest
indicates it wishes to use them.

Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
---
arch/s390/include/asm/kvm_host.h | 4 ++++
arch/s390/kvm/kvm-s390.c | 38 ++++++++++++++++++++++++++++++++
arch/s390/kvm/kvm-s390.h | 10 +++++++++
3 files changed, 52 insertions(+)

diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index c1518a505060..8e381603b6a7 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -254,7 +254,10 @@ struct kvm_s390_sie_block {
#define ECB2_IEP 0x20
#define ECB2_PFMFI 0x08
#define ECB2_ESCA 0x04
+#define ECB2_ZPCI_LSI 0x02
__u8 ecb2; /* 0x0062 */
+#define ECB3_AISI 0x20
+#define ECB3_AISII 0x10
#define ECB3_DEA 0x08
#define ECB3_AES 0x04
#define ECB3_RI 0x01
@@ -940,6 +943,7 @@ struct kvm_arch{
int use_cmma;
int use_pfmfi;
int use_skf;
+ int use_zpci_interp;
int user_cpu_state_ctrl;
int user_sigp;
int user_stsi;
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index d96c9be0480b..a66da3f66114 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -1031,6 +1031,42 @@ static int kvm_s390_vm_set_crypto(struct kvm *kvm, struct kvm_device_attr *attr)
return 0;
}

+static void kvm_s390_vcpu_pci_setup(struct kvm_vcpu *vcpu)
+{
+ /* Only set the ECB bits after guest requests zPCI interpretation */
+ if (!vcpu->kvm->arch.use_zpci_interp)
+ return;
+
+ vcpu->arch.sie_block->ecb2 |= ECB2_ZPCI_LSI;
+ vcpu->arch.sie_block->ecb3 |= ECB3_AISII + ECB3_AISI;
+}
+
+void kvm_s390_vcpu_pci_enable_interp(struct kvm *kvm)
+{
+ struct kvm_vcpu *vcpu;
+ unsigned long i;
+
+ lockdep_assert_held(&kvm->lock);
+
+ if (!kvm_s390_pci_interp_allowed())
+ return;
+
+ /*
+ * If host is configured for PCI and the necessary facilities are
+ * available, turn on interpretation for the life of this guest
+ */
+ kvm->arch.use_zpci_interp = 1;
+
+ kvm_s390_vcpu_block_all(kvm);
+
+ kvm_for_each_vcpu(i, vcpu, kvm) {
+ kvm_s390_vcpu_pci_setup(vcpu);
+ kvm_s390_sync_request(KVM_REQ_VSIE_RESTART, vcpu);
+ }
+
+ kvm_s390_vcpu_unblock_all(kvm);
+}
+
static void kvm_s390_sync_request_broadcast(struct kvm *kvm, int req)
{
unsigned long cx;
@@ -3336,6 +3372,8 @@ static int kvm_s390_vcpu_setup(struct kvm_vcpu *vcpu)

kvm_s390_vcpu_crypto_setup(vcpu);

+ kvm_s390_vcpu_pci_setup(vcpu);
+
mutex_lock(&vcpu->kvm->lock);
if (kvm_s390_pv_is_protected(vcpu->kvm)) {
rc = kvm_s390_pv_create_cpu(vcpu, &uvrc, &uvrrc);
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index 497d52a83c78..975cffaf13de 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -507,6 +507,16 @@ void kvm_s390_reinject_machine_check(struct kvm_vcpu *vcpu,
*/
void kvm_s390_vcpu_crypto_reset_all(struct kvm *kvm);

+/**
+ * kvm_s390_vcpu_pci_enable_interp
+ *
+ * Set the associated PCI attributes for each vcpu to allow for zPCI Load/Store
+ * interpretation as well as adapter interruption forwarding.
+ *
+ * @kvm: the KVM guest
+ */
+void kvm_s390_vcpu_pci_enable_interp(struct kvm *kvm);
+
/**
* diag9c_forwarding_hz
*
--
2.27.0
\
 
 \ /
  Last update: 2022-06-06 22:38    [W:0.311 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site