lkml.org 
[lkml]   [2022]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v9 00/21] KVM: s390: enable zPCI for interpretive execution
From

Am 06.06.22 um 22:33 schrieb Matthew Rosato:
> Enable interpretive execution of zPCI instructions + adapter interruption
> forwarding for s390x KVM vfio-pci. This is done by triggering a routine
> when the VFIO group is associated with the KVM guest, transmitting to
> firmware a special token (GISA designation) to enable that specific guest
> for interpretive execution on that zPCI device. Load/store interpreation
> enablement is then controlled by userspace (based upon whether or not a
> SHM bit is placed in the virtual function handle). Adapter Event
> Notification interpretation is controlled from userspace via a new KVM
> ioctl.
>
> By allowing intepretation of zPCI instructions and firmware delivery of
> interrupts to guests, we can reduce the frequency of guest SIE exits for
> zPCI.
>
> From the perspective of guest configuration, you passthrough zPCI devices
> in the same manner as before, with intepretation support being used by
> default if available in kernel+qemu.
>
> Will follow up with a link the most recent QEMU series.
>
> Changelog v8->v9:
> - Rebase on top of 5.19-rc1, adjust ioctl and capability defines
> - s/kzdev = 0/kzdev = NULL/ (Alex)
> - rename vfio_pci_zdev_open to vfio_pci_zdev_open_device (Jason)
> - rename vfio_pci_zdev_release to vfio_pci_zdev_close_device (Jason)
> - make vfio_pci_zdev_close_device return void, instead WARN_ON or ignore
> errors in lower level function (kvm_s390_pci_unregister_kvm) (Jason)
> - remove notifier accidentally left in struct zpci_dev + associated
> include statment (Jason)
> - Remove patch 'KVM: s390: introduce CPU feature for zPCI Interpretation'
> based on discussion in QEMU thread.
>
> Matthew Rosato (21):
> s390/sclp: detect the zPCI load/store interpretation facility
> s390/sclp: detect the AISII facility
> s390/sclp: detect the AENI facility
> s390/sclp: detect the AISI facility
> s390/airq: pass more TPI info to airq handlers
> s390/airq: allow for airq structure that uses an input vector
> s390/pci: externalize the SIC operation controls and routine
> s390/pci: stash associated GISA designation
> s390/pci: stash dtsm and maxstbl
> vfio/pci: introduce CONFIG_VFIO_PCI_ZDEV_KVM
> KVM: s390: pci: add basic kvm_zdev structure
> KVM: s390: pci: do initial setup for AEN interpretation
> KVM: s390: pci: enable host forwarding of Adapter Event Notifications
> KVM: s390: mechanism to enable guest zPCI Interpretation
> KVM: s390: pci: provide routines for enabling/disabling interrupt
> forwarding
> KVM: s390: pci: add routines to start/stop interpretive execution
> vfio-pci/zdev: add open/close device hooks
> vfio-pci/zdev: add function handle to clp base capability
> vfio-pci/zdev: different maxstbl for interpreted devices
> KVM: s390: add KVM_S390_ZPCI_OP to manage guest zPCI devices
> MAINTAINERS: additional files related kvm s390 pci passthrough
>
> Documentation/virt/kvm/api.rst | 47 +++
> MAINTAINERS | 1 +
> arch/s390/include/asm/airq.h | 7 +-
> arch/s390/include/asm/kvm_host.h | 23 ++
> arch/s390/include/asm/pci.h | 11 +
> arch/s390/include/asm/pci_clp.h | 9 +-
> arch/s390/include/asm/pci_insn.h | 29 +-
> arch/s390/include/asm/sclp.h | 4 +
> arch/s390/include/asm/tpi.h | 13 +
> arch/s390/kvm/Makefile | 1 +
> arch/s390/kvm/interrupt.c | 96 ++++-
> arch/s390/kvm/kvm-s390.c | 83 +++-
> arch/s390/kvm/kvm-s390.h | 10 +
> arch/s390/kvm/pci.c | 690 +++++++++++++++++++++++++++++++
> arch/s390/kvm/pci.h | 88 ++++
> arch/s390/pci/pci.c | 16 +
> arch/s390/pci/pci_clp.c | 7 +
> arch/s390/pci/pci_insn.c | 4 +-
> arch/s390/pci/pci_irq.c | 48 ++-
> drivers/s390/char/sclp_early.c | 4 +
> drivers/s390/cio/airq.c | 12 +-
> drivers/s390/cio/qdio_thinint.c | 6 +-
> drivers/s390/crypto/ap_bus.c | 9 +-
> drivers/s390/virtio/virtio_ccw.c | 6 +-
> drivers/vfio/pci/Kconfig | 11 +
> drivers/vfio/pci/Makefile | 2 +-
> drivers/vfio/pci/vfio_pci_core.c | 10 +-
> drivers/vfio/pci/vfio_pci_zdev.c | 35 +-
> include/linux/sched/user.h | 3 +-
> include/linux/vfio_pci_core.h | 12 +-
> include/uapi/linux/kvm.h | 31 ++
> include/uapi/linux/vfio_zdev.h | 7 +
> 32 files changed, 1279 insertions(+), 56 deletions(-)
> create mode 100644 arch/s390/kvm/pci.c
> create mode 100644 arch/s390/kvm/pci.h

So I pulled this into a topic branch and will merge that into kvms390/next. We can
merge this topic branch into vfio-next and/or s390-next when the conflicts get
to complicated.

While pulling I fixed up the numbers for the capability to

#define KVM_CAP_S390_ZPCI_OP 221

and the doc number to

4.137 KVM_S390_ZPCI_OP

to minize struggle when doing backports.

\
 
 \ /
  Last update: 2022-07-08 13:34    [W:0.217 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site