lkml.org 
[lkml]   [2022]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] riscv: dts: startfive: currect number of external interrupts
Date
The PLIC integrated on the Vic_U7_Core integrated on the StarFive
JH7100 SoC actually supports 133 external interrupts. 127 of these
are exposed to the outside world; the remainder are used by other
devices that are part of the core-complex such as the L2 cache
controller. But all 133 interrupts are external interrupts as far
as the PLIC is concerned. Fixing the property that specifies the
number of external interrupts allows the driver to manage these
additional interrupts, whch is important since the interrupts for
the L2 cache controller are enabled by default.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
---
arch/riscv/boot/dts/starfive/jh7100.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
index 69f22f9aad9d..f48e232a72a7 100644
--- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
@@ -118,7 +118,7 @@ plic: interrupt-controller@c000000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
- riscv,ndev = <127>;
+ riscv,ndev = <133>;
};

clkgen: clock-controller@11800000 {
--
2.36.0
\
 
 \ /
  Last update: 2022-06-06 18:31    [W:0.134 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site