lkml.org 
[lkml]   [2022]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] ARM: dts: qcom: msm8974: re-add missing pinctrl
Date
As part of a recent cleanup commit, the pinctrl for a few uart and i2c
nodes was removed. Adjust the names and/or add it back and assign it to
the uart and i2c nodes.

Fixes: 1dfe967ec7cf ("ARM: dts: qcom-msm8974*: Consolidate I2C/UART/SDHCI")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Bjorn, could you please pick this up for -fixes so it lands in an
upcoming 5.19-rc?

arch/arm/boot/dts/qcom-msm8974.dtsi | 30 +++++++++++++++++++++++++----
1 file changed, 26 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 814ad0b46232..c3b8a6d63027 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -506,6 +506,8 @@ blsp1_uart2: serial@f991e000 {
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp1_uart2_default>;
status = "disabled";
};

@@ -581,6 +583,9 @@ blsp2_uart1: serial@f995d000 {
interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_uart1_default>;
+ pinctrl-1 = <&blsp2_uart1_sleep>;
status = "disabled";
};

@@ -599,6 +604,8 @@ blsp2_uart4: serial@f9960000 {
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp2_uart4_default>;
status = "disabled";
};

@@ -639,6 +646,9 @@ blsp2_i2c6: i2c@f9968000 {
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c6_default>;
+ pinctrl-1 = <&blsp2_i2c6_sleep>;
#address-cells = <1>;
#size-cells = <0>;
};
@@ -1256,7 +1266,7 @@ cd {
};
};

- blsp1_uart2_active: blsp1-uart2-active {
+ blsp1_uart2_default: blsp1-uart2-default {
rx {
pins = "gpio5";
function = "blsp_uart2";
@@ -1272,7 +1282,7 @@ tx {
};
};

- blsp2_uart1_active: blsp2-uart1-active {
+ blsp2_uart1_default: blsp2-uart1-default {
tx-rts {
pins = "gpio41", "gpio44";
function = "blsp_uart7";
@@ -1295,7 +1305,7 @@ blsp2_uart1_sleep: blsp2-uart1-sleep {
bias-pull-down;
};

- blsp2_uart4_active: blsp2-uart4-active {
+ blsp2_uart4_default: blsp2-uart4-default {
tx-rts {
pins = "gpio53", "gpio56";
function = "blsp_uart10";
@@ -1406,7 +1416,19 @@ blsp2_i2c5_sleep: blsp2-i2c5-sleep {
bias-pull-up;
};

- /* BLSP2_I2C6 info is missing - nobody uses it though? */
+ blsp2_i2c6_default: blsp2-i2c6-default {
+ pins = "gpio87", "gpio88";
+ function = "blsp_i2c12";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+ pins = "gpio87", "gpio88";
+ function = "blsp_i2c12";
+ drive-strength = <2>;
+ bias-pull-up;
+ };

spi8_default: spi8_default {
mosi {
--
2.36.1
\
 
 \ /
  Last update: 2022-06-06 18:11    [W:0.262 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site