lkml.org 
[lkml]   [2022]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/3] usb: dwc3: Refactor PHY logic to support Multiport Controller
From

On 6/2/2022 1:23 AM, Andrew Halaney wrote:
> On Tue, May 31, 2022 at 01:50:17PM +0530, Harsh Agarwal wrote:
>> Currently the DWC3 driver supports only single port controller
>> which requires at most 2 PHYs ie HS and SS PHYs.
>>
>> But some SOCs have a "multiport" USB DWC3 controller where a
>> single controller supports multiple ports and each port have
>> their own PHYs. Refactor PHY logic to support the same.
>>
>> Signed-off-by: Harsh Agarwal <quic_harshq@quicinc.com>
>> ---
>> drivers/usb/dwc3/core.c | 400 +++++++++++++++++++++++++++++++++-------------
>> drivers/usb/dwc3/core.h | 12 +-
>> drivers/usb/dwc3/drd.c | 16 +-
>> drivers/usb/dwc3/gadget.c | 4 +-
>> 4 files changed, 305 insertions(+), 127 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index 5734219..5cc799e 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -120,7 +120,7 @@ static void __dwc3_set_mode(struct work_struct *work)
>> {
>> struct dwc3 *dwc = work_to_dwc(work);
>> unsigned long flags;
>> - int ret;
>> + int i, ret;
>> u32 reg;
>>
>> mutex_lock(&dwc->mutex);
>> @@ -189,10 +189,13 @@ static void __dwc3_set_mode(struct work_struct *work)
>> if (ret) {
>> dev_err(dwc->dev, "failed to initialize host\n");
>> } else {
>> - if (dwc->usb2_phy)
>> - otg_set_vbus(dwc->usb2_phy->otg, true);
>> - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
>> - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
>> + for (i = 0; i < dwc->num_usb2_phy; i++) {
>> + if (dwc->usb2_phy[i])
>> + otg_set_vbus(dwc->usb2_phy[i]->otg, true);
>> + phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
>> + }
>> + for (i = 0; i < dwc->num_usb3_phy; i++)
>> + phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
>> if (dwc->dis_split_quirk) {
>> reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
>> reg |= DWC3_GUCTL3_SPLITDISABLE;
>> @@ -205,10 +208,10 @@ static void __dwc3_set_mode(struct work_struct *work)
>>
>> dwc3_event_buffers_setup(dwc);
>>
>> - if (dwc->usb2_phy)
>> - otg_set_vbus(dwc->usb2_phy->otg, false);
>> - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
>> - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
>> + if (dwc->usb2_phy[0])
>> + otg_set_vbus(dwc->usb2_phy[0]->otg, false);
>> + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
>> + phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);
>>
>> ret = dwc3_gadget_init(dwc);
>> if (ret)
>> @@ -656,6 +659,7 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc)
>> */
>> static int dwc3_phy_setup(struct dwc3 *dwc)
>> {
>> + int i;
>> unsigned int hw_mode;
>> u32 reg;
>>
>> @@ -716,7 +720,8 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
>> if (dwc->dis_del_phy_power_chg_quirk)
>> reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
>>
>> - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
>> + for (i = 0; i < dwc->num_usb3_phy; i++)
>> + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg);
>>
>> reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
>>
>> @@ -730,7 +735,8 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
>> } else if (dwc->hsphy_interface &&
>> !strncmp(dwc->hsphy_interface, "ulpi", 4)) {
>> reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
>> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
>> + for (i = 0; i < dwc->num_usb2_phy; i++)
>> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
>> } else {
>> /* Relying on default value. */
>> if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI))
>> @@ -787,7 +793,8 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
>> if (dwc->dis_u2_freeclk_exists_quirk)
>> reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;
>>
>> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
>> + for (i = 0; i < dwc->num_usb2_phy; i++)
>> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
>>
>> return 0;
>> }
>> @@ -826,17 +833,23 @@ static void dwc3_clk_disable(struct dwc3 *dwc)
>>
>> static void dwc3_core_exit(struct dwc3 *dwc)
>> {
>> + int i;
>> dwc3_event_buffers_cleanup(dwc);
>>
>> - usb_phy_shutdown(dwc->usb2_phy);
>> - usb_phy_shutdown(dwc->usb3_phy);
>> - phy_exit(dwc->usb2_generic_phy);
>> - phy_exit(dwc->usb3_generic_phy);
>> + for (i = 0; i < dwc->num_usb2_phy; i++) {
>> + usb_phy_shutdown(dwc->usb2_phy[i]);
>> + usb_phy_set_suspend(dwc->usb2_phy[i], 1);
>> + phy_exit(dwc->usb2_generic_phy[i]);
>> + phy_power_off(dwc->usb2_generic_phy[i]);
>> + }
>> +
>> + for (i = 0; i < dwc->num_usb3_phy; i++) {
>> + usb_phy_shutdown(dwc->usb3_phy[i]);
>> + usb_phy_set_suspend(dwc->usb3_phy[i], 1);
>> + phy_exit(dwc->usb3_generic_phy[i]);
>> + phy_power_off(dwc->usb3_generic_phy[i]);
>> + }
>>
>> - usb_phy_set_suspend(dwc->usb2_phy, 1);
>> - usb_phy_set_suspend(dwc->usb3_phy, 1);
>> - phy_power_off(dwc->usb2_generic_phy);
>> - phy_power_off(dwc->usb3_generic_phy);
>> dwc3_clk_disable(dwc);
>> reset_control_assert(dwc->reset);
>> }
>> @@ -1039,7 +1052,7 @@ static int dwc3_core_init(struct dwc3 *dwc)
>> {
>> unsigned int hw_mode;
>> u32 reg;
>> - int ret;
>> + int ret, i;
>>
>> hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
>>
>> @@ -1067,16 +1080,24 @@ static int dwc3_core_init(struct dwc3 *dwc)
>> dwc->phys_ready = true;
>> }
>>
>> - usb_phy_init(dwc->usb2_phy);
>> - usb_phy_init(dwc->usb3_phy);
>> - ret = phy_init(dwc->usb2_generic_phy);
>> - if (ret < 0)
>> - goto err0a;
>> + for (i = 0; i < dwc->num_usb2_phy; i++)
>> + usb_phy_init(dwc->usb2_phy[i]);
>> + for (i = 0; i < dwc->num_usb3_phy; i++)
>> + usb_phy_init(dwc->usb3_phy[i]);
>>
>> - ret = phy_init(dwc->usb3_generic_phy);
>> - if (ret < 0) {
>> - phy_exit(dwc->usb2_generic_phy);
>> - goto err0a;
>> + for (i = 0; i < dwc->num_usb2_phy; i++) {
>> + ret = phy_init(dwc->usb2_generic_phy[i]);
>> + if (ret < 0)
>> + goto err0a;
> Should we clean up the prior phys that did not fail? There's a couple
> loops where that question stands in this patch.
I am just keeping the Generic PHY implementation as is.
Earlier also we were cleaning up the HS PHY incase
SS PHY fails, so keeping the same for Multiport.
For you please point out if you find any major concern here?

>> + }
>> +
>> + for (i = 0; i < dwc->num_usb3_phy; i++) {
>> + ret = phy_init(dwc->usb3_generic_phy[i]);
>> + if (ret < 0) {
>> + for (i = 0; i < dwc->num_usb2_phy; i++)
>> + phy_exit(dwc->usb2_generic_phy[i]);
>> + goto err0a;
>> + }
>> }
>>
>> ret = dwc3_core_soft_reset(dwc);
>> @@ -1086,15 +1107,19 @@ static int dwc3_core_init(struct dwc3 *dwc)
>> if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD &&
>> !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) {
>> if (!dwc->dis_u3_susphy_quirk) {
>> - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
>> - reg |= DWC3_GUSB3PIPECTL_SUSPHY;
>> - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
>> + for (i = 0; i < dwc->num_usb3_phy; i++) {
>> + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i));
>> + reg |= DWC3_GUSB3PIPECTL_SUSPHY;
>> + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg);
>> + }
>> }
>>
>> if (!dwc->dis_u2_susphy_quirk) {
>> - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
>> - reg |= DWC3_GUSB2PHYCFG_SUSPHY;
>> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
>> + for (i = 0; i < dwc->num_usb2_phy; i++) {
>> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
>> + reg |= DWC3_GUSB2PHYCFG_SUSPHY;
>> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
>> + }
>> }
>> }
>>
>> @@ -1113,15 +1138,19 @@ static int dwc3_core_init(struct dwc3 *dwc)
>>
>> dwc3_set_incr_burst_type(dwc);
>>
>> - usb_phy_set_suspend(dwc->usb2_phy, 0);
>> - usb_phy_set_suspend(dwc->usb3_phy, 0);
>> - ret = phy_power_on(dwc->usb2_generic_phy);
>> - if (ret < 0)
>> - goto err2;
>> + for (i = 0; i < dwc->num_usb2_phy; i++) {
>> + usb_phy_set_suspend(dwc->usb2_phy[i], 0);
>> + ret = phy_power_on(dwc->usb2_generic_phy[i]);
>> + if (ret < 0)
>> + goto err2;
>> + }
>>
>> - ret = phy_power_on(dwc->usb3_generic_phy);
>> - if (ret < 0)
>> - goto err3;
>> + for (i = 0; i < dwc->num_usb3_phy; i++) {
>> + usb_phy_set_suspend(dwc->usb3_phy[i], 0);
>> + ret = phy_power_on(dwc->usb3_generic_phy[i]);
>> + if (ret < 0)
>> + goto err3;
>> + }
>>
>> ret = dwc3_event_buffers_setup(dwc);
>> if (ret) {
>> @@ -1229,20 +1258,29 @@ static int dwc3_core_init(struct dwc3 *dwc)
>> return 0;
>>
>> err4:
>> - phy_power_off(dwc->usb3_generic_phy);
>> + for (i = 0; i < dwc->num_usb3_phy; i++)
>> + phy_power_off(dwc->usb3_generic_phy[i]);
>>
>> err3:
>> - phy_power_off(dwc->usb2_generic_phy);
>> + for (i = 0; i < dwc->num_usb2_phy; i++)
>> + phy_power_off(dwc->usb2_generic_phy[i]);
>>
>> err2:
>> - usb_phy_set_suspend(dwc->usb2_phy, 1);
>> - usb_phy_set_suspend(dwc->usb3_phy, 1);
>> + for (i = 0; i < dwc->num_usb2_phy; i++)
>> + usb_phy_set_suspend(dwc->usb2_phy[i], 1);
>> + for (i = 0; i < dwc->num_usb3_phy; i++)
>> + usb_phy_set_suspend(dwc->usb3_phy[i], 1);
>>
>> err1:
>> - usb_phy_shutdown(dwc->usb2_phy);
>> - usb_phy_shutdown(dwc->usb3_phy);
>> - phy_exit(dwc->usb2_generic_phy);
>> - phy_exit(dwc->usb3_generic_phy);
>> + for (i = 0; i < dwc->num_usb2_phy; i++) {
>> + usb_phy_shutdown(dwc->usb2_phy[i]);
>> + phy_exit(dwc->usb2_generic_phy[i]);
>> + }
>> +
>> + for (i = 0; i < dwc->num_usb3_phy; i++) {
>> + usb_phy_shutdown(dwc->usb3_phy[i]);
>> + phy_exit(dwc->usb3_generic_phy[i]);
>> + }
>>
>> err0a:
>> dwc3_ulpi_exit(dwc);
>> @@ -1251,53 +1289,172 @@ static int dwc3_core_init(struct dwc3 *dwc)
>> return ret;
>> }
>>
>> -static int dwc3_core_get_phy(struct dwc3 *dwc)
>> +static struct usb_phy *dwc3_core_get_phy_by_handle_with_node(struct device *dev,
>> + const char *phandle, u8 index, struct device_node *lookup_node)
>> +{
>> + struct device_node *node;
>> + struct usb_phy *phy;
>> +
>> + node = of_parse_phandle(lookup_node, phandle, index);
>> + if (!node) {
>> + dev_err(dev, "failed to get %s phandle in %pOF node\n", phandle,
>> + dev->of_node);
>> + return ERR_PTR(-ENODEV);
>> + }
>> + phy = devm_usb_get_phy_by_node(dev, node, NULL);
>> + of_node_put(node);
>> + return phy;
>> +}
>> +
>> +static int dwc3_count_phys(struct dwc3 *dwc, struct device_node *lookup_node)
>> +{
>> + int count;
>> +
>> + count = of_count_phandle_with_args(lookup_node, "phys", NULL);
>> +
>> + if (count == -ENOENT)
>> + count = of_count_phandle_with_args(lookup_node, "usb-phy", NULL);
>> +
>> + if (count == 1) {
>> + dwc->num_usb2_phy++;
>> + } else if (count == 2) {
>> + dwc->num_usb2_phy++;
>> + dwc->num_usb3_phy++;
>> + } else {
>> + return count;
>> + }
>> + return 0;
>> +}
>> +
>> +static int dwc3_extract_num_phys(struct dwc3 *dwc)
>> +{
>> + struct device_node *ports, *port;
>> + int ret;
>> +
>> + /* Find if any "multiport" child is present inside DWC3*/
> Nit, space after DWC3
Done
>
>> + for_each_available_child_of_node(dwc->dev->of_node, ports) {
>> + if (!strcmp(ports->name, "multiport"))
>> + break;
>> + }
>> + if (!ports) {
>> + dwc->num_usb2_phy = 1;
>> + dwc->num_usb3_phy = 1;
>> + } else {
>> + for_each_available_child_of_node(ports, port) {
>> + ret = dwc3_count_phys(dwc, port);
>> + if (ret)
>> + return ret;
>> + }
>> + }
>> + dev_info(dwc->dev, "Num of HS and SS PHY are %u %u\n", dwc->num_usb2_phy,
>> + dwc->num_usb3_phy);
>> +
>> + dwc->usb2_phy = devm_kzalloc(dwc->dev,
>> + sizeof(*dwc->usb2_phy) * dwc->num_usb2_phy, GFP_KERNEL);
>> + if (!dwc->usb2_phy)
>> + return -ENOMEM;
>> +
>> + dwc->usb3_phy = devm_kzalloc(dwc->dev,
>> + sizeof(*dwc->usb3_phy) * dwc->num_usb3_phy, GFP_KERNEL);
>> + if (!dwc->usb3_phy)
>> + return -ENOMEM;
>> +
>> + dwc->usb2_generic_phy = devm_kzalloc(dwc->dev,
>> + sizeof(*dwc->usb2_generic_phy) * dwc->num_usb2_phy, GFP_KERNEL);
>> + if (!dwc->usb2_generic_phy)
>> + return -ENOMEM;
>> +
>> + dwc->usb3_generic_phy = devm_kzalloc(dwc->dev,
>> + sizeof(*dwc->usb3_generic_phy) * dwc->num_usb3_phy, GFP_KERNEL);
>> + if (!dwc->usb3_generic_phy)
>> + return -ENOMEM;
>> +
>> + return 0;
>> +}
>> +
>> +static int dwc3_core_get_phy_by_node(struct dwc3 *dwc,
>> + struct device_node *lookup_node, int i)
>> {
>> struct device *dev = dwc->dev;
>> - struct device_node *node = dev->of_node;
>> - int ret;
>> + int ret;
>>
>> - if (node) {
>> - dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
>> - dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1);
>> + if (lookup_node) {
>> + dwc->usb2_phy[i] = devm_of_usb_get_phy_by_phandle(dev,
>> + "usb-phy", 0, lookup_node);
>> + dwc->usb3_phy[i] = devm_of_usb_get_phy_by_phandle(dev,
>> + "usb-phy", 1, lookup_node);
>> } else {
>> - dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
>> - dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
>> + dwc->usb2_phy[i] = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
>> + dwc->usb3_phy[i] = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
>> }
>>
>> - if (IS_ERR(dwc->usb2_phy)) {
>> - ret = PTR_ERR(dwc->usb2_phy);
>> + if (IS_ERR(dwc->usb2_phy[i])) {
>> + ret = PTR_ERR(dwc->usb2_phy[i]);
>> if (ret == -ENXIO || ret == -ENODEV)
>> - dwc->usb2_phy = NULL;
>> + dwc->usb2_phy[i] = NULL;
>> else
>> return dev_err_probe(dev, ret, "no usb2 phy configured\n");
>> }
>>
>> - if (IS_ERR(dwc->usb3_phy)) {
>> - ret = PTR_ERR(dwc->usb3_phy);
>> + if (IS_ERR(dwc->usb3_phy[i])) {
>> + ret = PTR_ERR(dwc->usb3_phy[i]);
>> if (ret == -ENXIO || ret == -ENODEV)
>> - dwc->usb3_phy = NULL;
>> + dwc->usb3_phy[i] = NULL;
>> else
>> return dev_err_probe(dev, ret, "no usb3 phy configured\n");
>> }
>>
>> - dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
>> - if (IS_ERR(dwc->usb2_generic_phy)) {
>> - ret = PTR_ERR(dwc->usb2_generic_phy);
>> - if (ret == -ENOSYS || ret == -ENODEV)
>> - dwc->usb2_generic_phy = NULL;
>> + dwc->usb2_generic_phy[i] = devm_of_phy_get(dev, lookup_node, "usb2-phy");
>> + if (IS_ERR(dwc->usb2_generic_phy[i])) {
>> + ret = PTR_ERR(dwc->usb2_generic_phy[i]);
>> + if (ret == -ENODEV)
> I think this can be -ENOSYS if !CONFIG_GENERIC_PHY
For now, I have added it back
>
>> + dwc->usb2_generic_phy[i] = NULL;
>> else
>> return dev_err_probe(dev, ret, "no usb2 phy configured\n");
>> }
>>
>> - dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
>> - if (IS_ERR(dwc->usb3_generic_phy)) {
>> - ret = PTR_ERR(dwc->usb3_generic_phy);
>> - if (ret == -ENOSYS || ret == -ENODEV)
>> - dwc->usb3_generic_phy = NULL;
>> + dwc->usb3_generic_phy[i] = devm_of_phy_get(dev, lookup_node, "usb3-phy");
>> + if (IS_ERR(dwc->usb3_generic_phy[i])) {
>> + ret = PTR_ERR(dwc->usb3_generic_phy[i]);
>> + if (ret == -ENODEV)
>> + dwc->usb3_generic_phy[i] = NULL;
>> else
>> return dev_err_probe(dev, ret, "no usb3 phy configured\n");
>> }
>> + return 0;
>> +}
>> +
>> +static int dwc3_core_get_phy(struct dwc3 *dwc)
>> +{
>> + struct device *dev = dwc->dev;
>> + struct device_node *node = dev->of_node;
>> + struct device_node *ports, *port;
>> + int ret, i = 0;
>> +
>> + ret = dwc3_extract_num_phys(dwc);
>> + if (ret) {
>> + dev_err(dwc->dev, "Unable to extract number of PHYs\n");
>> + return ret;
>> + }
>> +
>> + /* Find if any "multiport" child is present inside DWC3*/
> Nit, space after DWC3
Done
>
>> + for_each_available_child_of_node(node, ports) {
>> + if (!strcmp(ports->name, "multiport"))
>> + break;
>> + }
>> +
>> + if (!ports) {
>> + ret = dwc3_core_get_phy_by_node(dwc, node, 0);
>> + if (ret)
>> + return ret;
>> + } else {
>> + for_each_available_child_of_node(ports, port) {
>> + ret = dwc3_core_get_phy_by_node(dwc, port, i);
>> + if (ret)
>> + return ret;
>> + i++;
>> + }
>> + }
>>
>> return 0;
>> }
>> @@ -1305,16 +1462,16 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
>> static int dwc3_core_init_mode(struct dwc3 *dwc)
>> {
>> struct device *dev = dwc->dev;
>> - int ret;
>> + int i, ret;
>>
>> switch (dwc->dr_mode) {
>> case USB_DR_MODE_PERIPHERAL:
>> dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
>>
>> - if (dwc->usb2_phy)
>> - otg_set_vbus(dwc->usb2_phy->otg, false);
>> - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
>> - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
>> + if (dwc->usb2_phy[0])
>> + otg_set_vbus(dwc->usb2_phy[0]->otg, false);
>> + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
>> + phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);
>>
>> ret = dwc3_gadget_init(dwc);
>> if (ret)
>> @@ -1323,10 +1480,15 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>> case USB_DR_MODE_HOST:
>> dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
>>
>> - if (dwc->usb2_phy)
>> - otg_set_vbus(dwc->usb2_phy->otg, true);
>> - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
>> - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
>> + for (i = 0; i < dwc->num_usb3_phy; i++) {
>> + if (dwc->usb2_phy[i])
>> + otg_set_vbus(dwc->usb2_phy[i]->otg, true);
>> + phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
>> + }
>> +
>> +
>> + for (i = 0; i < dwc->num_usb3_phy; i++)
>> + phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
>>
>> ret = dwc3_host_init(dwc);
>> if (ret)
>> @@ -1674,7 +1836,7 @@ static int dwc3_probe(struct platform_device *pdev)
>> struct resource *res, dwc_res;
>> struct dwc3 *dwc;
>>
>> - int ret;
>> + int ret, i;
>>
>> void __iomem *regs;
>>
>> @@ -1839,15 +2001,18 @@ static int dwc3_probe(struct platform_device *pdev)
>> dwc3_debugfs_exit(dwc);
>> dwc3_event_buffers_cleanup(dwc);
>>
>> - usb_phy_shutdown(dwc->usb2_phy);
>> - usb_phy_shutdown(dwc->usb3_phy);
>> - phy_exit(dwc->usb2_generic_phy);
>> - phy_exit(dwc->usb3_generic_phy);
>> -
>> - usb_phy_set_suspend(dwc->usb2_phy, 1);
>> - usb_phy_set_suspend(dwc->usb3_phy, 1);
>> - phy_power_off(dwc->usb2_generic_phy);
>> - phy_power_off(dwc->usb3_generic_phy);
>> + for (i = 0; i < dwc->num_usb2_phy; i++) {
>> + usb_phy_shutdown(dwc->usb2_phy[i]);
>> + usb_phy_set_suspend(dwc->usb2_phy[i], 1);
>> + phy_exit(dwc->usb2_generic_phy[i]);
>> + phy_power_off(dwc->usb2_generic_phy[i]);
>> + }
>> + for (i = 0; i < dwc->num_usb3_phy; i++) {
>> + usb_phy_shutdown(dwc->usb3_phy[i]);
>> + usb_phy_set_suspend(dwc->usb3_phy[i], 1);
>> + phy_exit(dwc->usb3_generic_phy[i]);
>> + phy_power_off(dwc->usb3_generic_phy[i]);
>> + }
>>
>> dwc3_ulpi_exit(dwc);
>>
>> @@ -1929,6 +2094,7 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)
>>
>> static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>> {
>> + int i;
>> unsigned long flags;
>> u32 reg;
>>
>> @@ -1951,17 +2117,21 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>> /* Let controller to suspend HSPHY before PHY driver suspends */
>> if (dwc->dis_u2_susphy_quirk ||
>> dwc->dis_enblslpm_quirk) {
>> - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
>> - reg |= DWC3_GUSB2PHYCFG_ENBLSLPM |
>> - DWC3_GUSB2PHYCFG_SUSPHY;
>> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
>> -
>> - /* Give some time for USB2 PHY to suspend */
>> - usleep_range(5000, 6000);
>> + for (i = 0; i < dwc->num_usb2_phy; i++) {
>> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
>> + reg |= DWC3_GUSB2PHYCFG_ENBLSLPM |
>> + DWC3_GUSB2PHYCFG_SUSPHY;
>> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
>> +
>> + /* Give some time for USB2 PHY to suspend */
>> + usleep_range(5000, 6000);
>> + }
>> }
>>
>> - phy_pm_runtime_put_sync(dwc->usb2_generic_phy);
>> - phy_pm_runtime_put_sync(dwc->usb3_generic_phy);
>> + for (i = 0; i < dwc->num_usb2_phy; i++)
>> + phy_pm_runtime_put_sync(dwc->usb2_generic_phy[i]);
>> + for (i = 0; i < dwc->num_usb3_phy; i++)
>> + phy_pm_runtime_put_sync(dwc->usb3_generic_phy[i]);
>> break;
>> case DWC3_GCTL_PRTCAP_OTG:
>> /* do nothing during runtime_suspend */
>> @@ -1989,7 +2159,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>> static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
>> {
>> unsigned long flags;
>> - int ret;
>> + int i, ret;
>> u32 reg;
>>
>> switch (dwc->current_dr_role) {
>> @@ -2012,17 +2182,21 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
>> break;
>> }
>> /* Restore GUSB2PHYCFG bits that were modified in suspend */
>> - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
>> - if (dwc->dis_u2_susphy_quirk)
>> - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
>> + for (i = 0; i < dwc->num_usb2_phy; i++) {
>> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
>> + if (dwc->dis_u2_susphy_quirk)
>> + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
>>
>> - if (dwc->dis_enblslpm_quirk)
>> - reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
>> + if (dwc->dis_enblslpm_quirk)
>> + reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
>>
>> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
>> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
>> + }
>>
>> - phy_pm_runtime_get_sync(dwc->usb2_generic_phy);
>> - phy_pm_runtime_get_sync(dwc->usb3_generic_phy);
>> + for (i = 0; i < dwc->num_usb2_phy; i++)
>> + phy_pm_runtime_get_sync(dwc->usb2_generic_phy[i]);
>> + for (i = 0; i < dwc->num_usb3_phy; i++)
>> + phy_pm_runtime_get_sync(dwc->usb3_generic_phy[i]);
>> break;
>> case DWC3_GCTL_PRTCAP_OTG:
>> /* nothing to do on runtime_resume */
>> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
>> index 81c486b..c169bf1 100644
>> --- a/drivers/usb/dwc3/core.h
>> +++ b/drivers/usb/dwc3/core.h
>> @@ -1020,6 +1020,8 @@ struct dwc3_scratchpad_array {
>> * @usb_psy: pointer to power supply interface.
>> * @usb2_phy: pointer to USB2 PHY
>> * @usb3_phy: pointer to USB3 PHY
>> + * @num_usb2_phy: Number of HS ports controlled by the core
>> + * @num_dsphy: Number of SS ports controlled by the core
> s/num_dsphy/num_usb3_phy/
Done
>
>> * @usb2_generic_phy: pointer to USB2 PHY
>> * @usb3_generic_phy: pointer to USB3 PHY
>> * @phys_ready: flag to indicate that PHYs are ready
>> @@ -1147,11 +1149,13 @@ struct dwc3 {
>>
>> struct reset_control *reset;
>>
>> - struct usb_phy *usb2_phy;
>> - struct usb_phy *usb3_phy;
>> + struct usb_phy **usb2_phy;
>> + struct usb_phy **usb3_phy;
>> + u32 num_usb2_phy;
>> + u32 num_usb3_phy;
>>
>> - struct phy *usb2_generic_phy;
>> - struct phy *usb3_generic_phy;
>> + struct phy **usb2_generic_phy;
>> + struct phy **usb3_generic_phy;
>>
>> bool phys_ready;
>>
>> diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
>> index 039bf24..404643f 100644
>> --- a/drivers/usb/dwc3/drd.c
>> +++ b/drivers/usb/dwc3/drd.c
>> @@ -384,10 +384,10 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
>> if (ret) {
>> dev_err(dwc->dev, "failed to initialize host\n");
>> } else {
>> - if (dwc->usb2_phy)
>> - otg_set_vbus(dwc->usb2_phy->otg, true);
>> - if (dwc->usb2_generic_phy)
>> - phy_set_mode(dwc->usb2_generic_phy,
>> + if (dwc->usb2_phy[0])
>> + otg_set_vbus(dwc->usb2_phy[0]->otg, true);
>> + if (dwc->usb2_generic_phy[0])
>> + phy_set_mode(dwc->usb2_generic_phy[0],
>> PHY_MODE_USB_HOST);
>> }
>> break;
>> @@ -398,10 +398,10 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
>> dwc3_event_buffers_setup(dwc);
>> spin_unlock_irqrestore(&dwc->lock, flags);
>>
>> - if (dwc->usb2_phy)
>> - otg_set_vbus(dwc->usb2_phy->otg, false);
>> - if (dwc->usb2_generic_phy)
>> - phy_set_mode(dwc->usb2_generic_phy,
>> + if (dwc->usb2_phy[0])
>> + otg_set_vbus(dwc->usb2_phy[0]->otg, false);
>> + if (dwc->usb2_generic_phy[0])
>> + phy_set_mode(dwc->usb2_generic_phy[0],
>> PHY_MODE_USB_DEVICE);
>> ret = dwc3_gadget_init(dwc);
>> if (ret)
>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>> index 00427d1..e3b2a17 100644
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -2872,8 +2872,8 @@ static int dwc3_gadget_vbus_draw(struct usb_gadget *g, unsigned int mA)
>> union power_supply_propval val = {0};
>> int ret;
>>
>> - if (dwc->usb2_phy)
>> - return usb_phy_set_power(dwc->usb2_phy, mA);
>> + if (dwc->usb2_phy[0])
>> + return usb_phy_set_power(dwc->usb2_phy[0], mA);
>>
>> if (!dwc->usb_psy)
>> return -EOPNOTSUPP;
>> --
>> 2.7.4
>>

\
 
 \ /
  Last update: 2022-06-05 20:23    [W:0.937 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site